H&B engine bar kit?

[Runt]

Just wondering if its possible to pick up a H&B engine bar fitting kit( Spacers and such) if like me you have the bars from ebay and no kit to fit it?
Or can some one please supply dimentions for bolts and spacers so that I can go and make/buy some bits
Forgot to mention its for an 1150GS

 

[Sprockett]

Fixing Kit

If you look around on this site you can find fitting instructions. They say the bits you are looking for:-

The fitting kit
The fitting kit that comes with the bars consists of the following:
• Four 65mm long allen-headed bolts (requiring an 8mm allen key/socket)
• Four large washers
• Two smaller washers
• One M8 self-locking nut and bolt
• Two 18/11 x 12mm long alloy spacers
• One 18/11 x 20mm long alloy spacer
• One 18/11 x 17mm long alloy spacer

 

[sethmopp]

Or you can contact motobins. They're the importer for H&B stuff.

 

[<<Mark_C>>]

Runt - I may have exactly what you are looking for, having been in the same situation myself a couple of years ago.

Will PM you

 

[Runt]

Thx a lot guys


PM'd you Mark