Hammerite smooth silver Paint on barrels

[Den]

Has anyone used this stuff on cylinder barrels or heads.
I cant find any temperature ratings for it.

 

[Timolgra]

When I was a marine engineer I would often spray rebuilt engines with Hammerite and never had problems with heat, even on air cooled engines.
I don't think you will have any problems.

Tim

 

[carbold]

used it on heads over a year ago and no problem

 

[ELIMINATOR]

Does that make you hammer heads then?

 

[Wizard]

Does that make you hammer heads then?

bada boom tish!

 

[Nin]

Used it on my airhead heads and rocker covers with no problems at all.

No, that doesn't make it an air hammer head. Or a hammer head air. Or anything else.

 

[cookie]

i've seen this stuff used on 1150 rocker covers with no heat problems.

i use it on all sorts of things. MUCH nicer finish than hammerite, rather like powder coat.

 

[Parky]

I used smooth silver hammerite on the head cover on my 1200 GS after a low speed spill and also to refurbish a second hand one after another higher speed spill on the other side, I really ought to be more careful... Good finish and matches quite well with no subsequent problems

 

[blues n twos]

I used it to touch up the inner parts of the barrels. The only problem I had was it smelt for a couple of days but it hasn't flaked off or anything. Trouble is its dirty again and you can't tell it's been done