Handlebar pull backs

[trancey]

Anyone fitted a set of pull backs to an LC GSA? I damaged my shoulder last year and need the bars to be closer to my body and was looking for recommendations on a closer position. I've been riding a Ducati Multistrada and the position has been really good, so looking for a similar position as my GSA is due next week.

 

[kurienp]

Called bar risers otherwise. Yes, makes it a helluva comfortable on long rides.

If you need higher bars - get the standard Wunderlich ones from uncle norman - 25mm up only.

If you need higher and closer to you - get the 40 mm up and back. I have these and they work wonders.

 

[iandavid]

can you it the 40mm ones without any issues on brake/clutch lines and cables?

 

[Nutty]

can you it the 40mm ones without any issues on brake/clutch lines and cables?

I have these, and the lines didn't need to be adjusted

 

[stephen.stallebrass]

Check out the Rox Risers - lots of adjustability. Here are some on my F800GS.

 

[stevie Allen]

onthe 40mm 20 up 20 back ,also rox risers even more adjustable to suit your needs.
It eliminated the ache i had across the top of my shoulder blades on long runs .

 

[iandavid]

thanks

 

[CPJS]

Yes as well to the 40mm up and back rox risers, as for cables etc , on the GS it is best to (easy) but I don't know about the GSA.

 

[Beemer Bob]

Hi all,
Who in the UK stocks the Rox Risers?
Looks like they will do the trick.

Cheers,
Bob

 

[kurienp]

Google's your friend ... however, uncle norman has them (www.nippynormans.com). Go on ... ask Santa to get them for you this Christmas

Hi all,
Who in the UK stocks the Rox Risers?
Looks like they will do the trick.

Cheers,
Bob

 

[masterman21]

Hi all,
Who in the UK stocks the Rox Risers?
Looks like they will do the trick.

Adventure bike shop stock them and Cliff is very helpfull ! I fitted the Wunderlick up and back risers. No problems with cables and very easy to fit .

http://www.adventurebikeshop.co.uk/brand-manufacturer/roxspeed

http://www.adventurebikeshop.co.uk/brand-manufacturer/Wunderlich

 

[Beemer Bob]

 

[Author]

I got these from Nippy's, Part No: WUN-41970-111. Admittedly they are on a GS not GSA but they lift and move the bars towards the rider. I was getting pain in my upper back and shoulders but these stopped it. As for fitting, they are simple and on the GS there was just enough slack once the first ty-wrap was cut on the brake cable. Says they are for GSA as well so should be ok?