Help needed please

[sp1v]

Evening

Got a bit of a problem with my hazards, 99 R1150GS. Took battery off & refitted.

Now when ignition turned on hazards light up without flashing. When I press indi's they work but the other side stays on solid whilst indi flashes?

When I press & hold the off button in, the hazards go out but as soon as I let go they come on again but don't flash.

Any help/advice will be gratefully received, thanks.

 

[cookie]

sounds like a bad earth. have you left a wire off the battery somehow?

i thought they were all crimped up as one, but you never know.

 

[sani]

Evening

Got a bit of a problem with my hazards, 99 R1150GS. Took battery off & refitted.

Now when ignition turned on hazards light up without flashing. When I press indi's they work but the other side stays on solid whilst indi flashes?

When I press & hold the off button in, the hazards go out but as soon as I let go they come on again but don't flash.

Any help/advice will be gratefully received, thanks.

It sounds a bit complicatedcheck the fuse box and try to reset the ABS.or switch the ignition off and try to twist the throttle 3 times and start the ignition.

 

[Tarka]

check the fuse box and try to reset the ABS.or switch the ignition off and try to twist the throttle 3 times and start the ignition.

Exactly what fecking good do you think that`ll do ???

 

[Timolgra]

Exactly what fecking good do you think that`ll do ???

 

[pablo666]

Bad earth or flasher relay has died IMHO

 

[sani]

Just help

 

[sp1v]

Thanks guys..................................Sani in a weird sort of way that includes you too.

 

[sani]

Thanks guys..................................Sani in a weird sort of way that includes you too.

Is not a weird way I just try to help .Sam time it works sp.when change the battery.