Help needed

[redpadraig]

Hi Lads, I'm unable to send route's from Mapsource to my Zumo 660. When I complete my route in Mapsource I convert it to gpx route. I have followed the instructions as per manual however after copying the route from Mapsource and then opening the GPX file in the Zumo in order to past the route I then go to Edit but I'm unable to as paste isn't highlighted.
What I really want to do it transfer routes to the SD card in the Zumo but find I'm unable to.
Any help would be really appreciated.
Red

 

[markie_wales]

You don't need to convert them to GPX, just open the GDB file and send, then boot 660 and import. Should work OK.

cheers

Markie

 

[John Armstrong]

That's a hard way of doing something so simple

In Mapsource select the "send to device" and make sure you're either sending it to the zumo or card as you wish. BTW I prefix the name of routes I send to the card with "SD" so I know which ones I'm looking at / editing when using the 660.

 

[Pablo1]

That's a hard way of doing something so simple

In Mapsource select the "send to device" and make sure you're either sending it to the zumo or card as you wish. BTW I prefix the name of routes I send to the card with "SD" so I know which ones I'm looking at / editing when using the 660.

+1

 

[redpadraig]

Bingo,
Many thanks lad's for your assistance What I did wrong was leave the Zumo attached to the main computer with the SD card installed I disconnected the Zumo and send the Route directly to the SD card. All done and dusted