HID Conversion Kits 55 Watt 6000k for 800 GS 1150 GS & A & 1200 GS & A plus RT and GT

BMW R1200GS Adventure FULL KIT

Hi David,

Good to meet you yesterday, glad you like the kits, and the LED side bulb we will post the video clip of your adventure with all four lights on youtube and put a link here later for you to have a look at. Thanks for your business. :thumb2

Best Regards

Mick
 
Hi David,

Good to meet you yesterday, glad you like the kits, and the LED side bulb we will post the video clip of your adventure with all four lights on youtube and put a link here later for you to have a look at. Thanks for your business. :thumb2

Best Regards

Mick


Hi David,

Here is the link to your bike Video:- http://www.youtube.com/watch?v=zaRxMeNAkLM The lights look great!

Thanks again!

Mick :clap
 
Hi Mick
did you manage to get my bits in the post yet
All the best mark
 
Hi Mick
did you manage to get my bits in the post yet
All the best mark

Hi Mark,

Hope you got the bulbs, we are looking at new lables for the kits for those in non UK places:- Might help if your ever stopped.?? :eek:
 

Attachments

  • Ballast1.6.jpg
    Ballast1.6.jpg
    38.2 KB · Views: 333
hi Mick
As of today nothing , will leave it to mid next week if still nothing wil give you a call. should they turn up i will let you know
many thanks mark
 
hi Mick
As of today nothing , will leave it to mid next week if still nothing wil give you a call. should they turn up i will let you know
many thanks mark

Hi Mark,

Wow the post is slow, if you dont get anything by next week i will send file a claim and send out two more for you! H11 I belive? I have proof of posting but more important is you getting the product! :thumb2

Regards

Mick
 
Todays Adventure HID Fitting for Chris

Here is Chris's nice new Adventure with Main and Dip converted! Thanks Chris for the business, looks great!
 

Attachments

  • Chris's adventure.jpg
    Chris's adventure.jpg
    105.5 KB · Views: 410
Cheers Mick! Very happy with the work. Can't wait to get out in the dark now...

MrP

Hi Chris, Glad you like the lights! They look great, just got to match the fogs up LOL.

Regards

Mick

HID LIGHTS:- Fitting HID lights to you motorbike or car greatly increases your visibility during the day as much as it allows you to see better at night. HID lights for motorcycles draw less power than your original bulbs so for example a 55 Watt HID light replacing the standard 55 Watt filament bulb with only draw 35 Watts from your alternator making you alternator work less. On top of this Motorbike HID lights are 300% brighter than normal lights. Here at www.motorbikeadventures.co.uk we use 6000 Kelvin bulbs with an array of fitments including but not limited to:- H1, H3, H7, and H11. <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
Motorcycle HID lights come in two parts the bulb and the ballast with starter. The bulbs are easy to fit and we have yet to find a bike that we have not been able to fit the kits too! The normal lighting systems of motorbikes is shockingly poor and HID lights add a considerable visual presence to your bike! We have found that HID’s it greatly reduce car drivers pulling out on you on those all too often lane changes where they appear not to have even noticed your there! Bulbs last longer as there is no filament to break and changing both Dip beam and Main is recommended as the HID’s are so good it tends to render your normal Main beam useless! Installation time for a main and dip beam is 1 and half hours approx!<o:p></o:p>
 
Well done Mick they arrived the next day as promised :clap

Just fitted the H.I.D. conversions to the spot lights, the main & dip beam were done previously along with the L.E.D. pilot bulb, before conversion the spots look dull and yellow compared to the dipped beam.......

1167592368_nqCc4-L.jpg


After;

1167593030_5chCb-L.jpg


Much better :thumb
 
Well done Mick they arrived the next day as promised :clap

Just fitted the H.I.D. conversions to the spot lights, the main & dip beam were done previously along with the L.E.D. pilot bulb, before conversion the spots look dull and yellow compared to the dipped beam.......

1167592368_nqCc4-L.jpg


After;

1167593030_5chCb-L.jpg


Much better :thumb


Hi Steve,

Glad you like the kits! Looks fantastic with all four done and an LED super side light! Thanks for the order!:bounce1
 
Hi Chris, Glad you like the lights! They look great, just got to match the fogs up LOL.

Regards

Mick

HID LIGHTS:- Fitting HID lights to you motorbike or car greatly increases your visibility during the day as much as it allows you to see better at night. HID lights for motorcycles draw less power than your original bulbs so for example a 55 Watt HID light replacing the standard 55 Watt filament bulb with only draw 35 Watts from your alternator making you alternator work less. On top of this Motorbike HID lights are 300% brighter than normal lights. Here at www.motorbikeadventures.co.uk we use 6000 Kelvin bulbs with an array of fitments including but not limited to:- H1, H3, H7, and H11. <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
Motorcycle HID lights come in two parts the bulb and the ballast with starter. The bulbs are easy to fit and we have yet to find a bike that we have not been able to fit the kits too! The normal lighting systems of motorbikes is shockingly poor and HID lights add a considerable visual presence to your bike! We have found that HID’s it greatly reduce car drivers pulling out on you on those all too often lane changes where they appear not to have even noticed your there! Bulbs last longer as there is no filament to break and changing both Dip beam and Main is recommended as the HID’s are so good it tends to render your normal Main beam useless! Installation time for a main and dip beam is 1 and half hours approx!<o:p></o:p>

WWW.motorbikeadventures.co.UK
 


Back
Top Bottom