HID Conversion Kits 55 Watt 6000k for 800 GS 1150 GS & A & 1200 GS & A plus RT and GT

I fitted a HID to my dip on my F8GS last week (thanks Richard) using the antiglare bulb. Wow, what a difference, pretty much makes the high beam redundant on the lanes I use on my commute, without blinding oncoming cars.

I will probably upgrade the main beam in due course, but for now I'm more than happy with just the dip.
 
spm0912 said:
I fitted a HID to my dip on my F8GS last week (thanks Richard) using the antiglare bulb. Wow, what a difference, pretty much makes the high beam redundant on the lanes I use on my commute, without blinding oncoming cars.

I will probably upgrade the main beam in due course, but for now I'm more than happy with just the dip.
Click to expand...


Many thanks for ordering our kits, glad you like them and if you need anything else just give me a call. :thumb2

Rich
 
That looks a bit brighter! Thanks very much for coming to our house and fitting the HIDs to main and dip beam yesterday Richard and thank you for the key rings.

Kevin
 

Attachments

  • 004_resize.JPG
    004_resize.JPG
    26.1 KB · Views: 99
X5 Adventure HID's

Hi John, X5 kits on their way to you! Thanks for the order. :thumb2 New stock of Expo HIDs expected this week. H7R Mk3's now in stock plus standered HID bulbs H1 for BMW 1150 GS H3 for spots and KTM's H9's for KTMs and H11 for 1200 Fogs all in stock www.motorbikeadventures.co.uk :thumb2
 
HIDs

So why buy HIDs from us?

Top quality bulbs with top quality waterproof connectors soldered connections and extra thick rugged wiring.

Overload protection. The ballasts cut out to prevent electrical damage.

Low Voltage Protection. The ballasts shut down to prevent drawing excessive current from the battery.

Reverse polarity protection circuits to protect you if you get the positive and negative connected incorrectly.

Resin filled hard metal cases that are Shock Resistant, Dust Proof, Water Proof and will even work submerged under water.

Fast start up times and extra long life units with a minimum of 1 years guarantee on any defective ballast.

Guaranteed to work with ALL BMW bikes and you don’t need to turn other lights off for ours to work correctly from start up.

You can’t buy our lights from any other UK seller. We supply our kits worldwide.

Our kits are fitted to expedition bikes and have been tested on EVERY continent in the world so you know when you buy our lights they will work anywhere in the world and in the most demanding conditions.
 
More HID Info

Our HID's
We take great pride in knowing that our HID’s are top quality and that they do the job they are supposed to do. Everything from the type of bulbs we use to the waterproof connectors and the inbuilt electronics of the ballast and starter units are designed specifically to work with BMW motorbikes.

The quality of the components that we use to build our HID’s dictate the final price to the consumer. You can get very cheap kits on the market made with very cheap components 9 times out of 10 they won’t work, and if they do they fail soon after fitting.

35 Watt kits are cheaper than 55 watt kits and we only recommend fitting the same power bulb that comes out of the bike from the factory, so with BMW bikes for example they all use 55 watt bulbs and that’s what should be used as a replacement
 
NigelG said:
Had my bike fully converted to HIDS by Mick at Motorbike Adventures and am seriously impressed at the quality of the kits and with the price. They are seriously rugged and water proofed and improve the night riding and bikes visibility no end. However, I always think the true sign of good service is how an issue is handled. I had a problem with one of my aux lights which can only happen the day you are about to start a big 10 day trip. I contacted Mick, and because I didn't have much time for him to diagnose, he swapped the whole unit out for a new one under warranty. We were up and running again in 15 minutes. Great product, great service and an all round good bloke!
Click to expand...

:thumb2
 
HIDs

kinsey said:
Mick,

Just a quick note to say thanks for fitting both the high and low beams to my GS1150 yesterday - the units have transformed riding in the dark, I'm so pleased and happy with the way the ballasts etc are hidden away - v. neat abd tidy! Many thanks!
Click to expand...


:thumb Thanks for the feedback :thumb2
 
Hi.

Enquired previously about H4 fitting bulb for R80ST.

Do you have them in yet?

Thanks
 
Nosh H4

Hi Nosh,

Yes we have one one in stock right now comes in at £79.99 as its a dual light. We have sold these to R80 and R100 customers. Please give me a call and we can sort out the order for you.

Regards

Rich




dr nosh said:
Hi.

Enquired previously about H4 fitting bulb for R80ST.

Do you have them in yet?

Thanks
Click to expand...
 
HIDs

Our HID's
We take great pride in knowing that our HID’s are top quality and that they do the job they are supposed to do. Everything from the type of bulbs we use to the waterproof connectors and the inbuilt electronics of the ballast and starter units are designed specifically to work with BMW motorbikes.

The quality of the components that we use to build our HID’s dictate the final price to the consumer. You can get very cheap kits on the market made with very cheap components 9 times out of 10 they won’t work, and if they do they fail soon after fitting.

35 Watt kits are cheaper than 55 watt kits and we only recommend fitting the same power bulb that comes out of the bike from the factory, so with BMW bikes for example they all use 55 watt bulbs and that’s what should be used as a replacement.

www.motorbikeadventures.co.uk :thumb2
 
Hi, I'm looking at your site for info on the correct kit for my F800GS, the Expedition CanBus H7 HIDs 55 Watt 6000K is the right one yes?

Are they a DIY fit, or do they need any pro installation at all?

Cheers
 
snappo said:
Hi, I'm looking at your site for info on the correct kit for my F800GS, the Expedition CanBus H7 HIDs 55 Watt 6000K is the right one yes?

Are they a DIY fit, or do they need any pro installation at all?

Cheers
Click to expand...

Hi Snappo,
For your dip beam i would go for the X5 Adventure model with an H7R anti glare bulb, its all DIY so no worries with that. Fitting instructions are on our website and apply the same to the 800 even thought we show the 1200. We can fit for 25 per light. You don't need an H7R if your doing the Main beam just an ordinary H7 that comes with the kit is fine. :thumb2

Regards

Rich
 
Nippy Normans supply Touratech, Wunderlich, Desert Fox and many other makes of accessories.
You must log in or register to reply here.

Similar threads

MotorbikeAdventures
HID Conversion kits 55 watt 6000k for 800GS 1150 GS & A & 1200 GS & A Plus RT & GT
Replies
0
Views
788
MotorbikeAdventures
MotorbikeAdventures


Back
Top Bottom