K1600 and new Carpuride W502BS install

luckylucian

Well-known member
UKGSer Subscriber
Joined
May 16, 2006
Messages
623
Reaction score
21
Location
South Wales
Carpuride have just launched their new W502BS has an integrated interface which docks with the BMW cradle and supposedly works with the wonder wheel. On my K1600 the current Nav 5 sits behind the dash and is loaded into a carrier from the top, which then drops down behind the hole on the dash. Has anyone fitted one to their K16 yet? Its much narrower than the W502B which just had a box planted onto the back.
 
Go on to there website.......there should be a list of compatible models.

Xiaomi M14U
 
Mount it on a spindle mount, bolted into the steering column or onto a spigot, replacing one of the handlebar bolts.
 
Mount it on a spindle mount, bolted into the steering column or onto a spigot, replacing one of the handlebar bolts.
Just bought a new GT SE in blue arriving next week, hopefully I'm going to mount my XT 2 on the centre mount under the roundel and wire it direct to the battery. Its my third K16 and looking forward to the GT as the previous ones were GTL....
 


Back
Top Bottom