m9fnd
Registered user
- Joined
- Jun 11, 2013
- Messages
- 18
- Reaction score
- 0
Im new to this forum I know so appologies for asking so many questions so soon! But I've just made a major error and don't know what to do!
Have been trying to remove an inforad speed camera detector thingamy from my old triumph to put on my new f800. Simple enough I figured. Anyway unhooking everything has been a real pain. I had to remove the front cowl, take the cables out of the dash, unscrew the tank and pull the cable through. The power cable and earth were soldered directly onto the bikes wiring, so I clipped those and wrapped everything back up in electrical tape, carefully untangled everything from the bike and put all the panels back on.
Turned the key, lights on and can hear it prime, but no dash display and no ignition!
Really worried I've done something terrible and expensive. Have never played with electrics before and can now see why!
Fuses all seem good, and alarm still works a treat. Battery is getting low but thats not it.
One thing I've learnt is that I won't try to install this on my BMW!! Ahh help!!
Thanks...
Have been trying to remove an inforad speed camera detector thingamy from my old triumph to put on my new f800. Simple enough I figured. Anyway unhooking everything has been a real pain. I had to remove the front cowl, take the cables out of the dash, unscrew the tank and pull the cable through. The power cable and earth were soldered directly onto the bikes wiring, so I clipped those and wrapped everything back up in electrical tape, carefully untangled everything from the bike and put all the panels back on.
Turned the key, lights on and can hear it prime, but no dash display and no ignition!
Really worried I've done something terrible and expensive. Have never played with electrics before and can now see why!
Fuses all seem good, and alarm still works a treat. Battery is getting low but thats not it.
One thing I've learnt is that I won't try to install this on my BMW!! Ahh help!!
Thanks...




be nice! 