LED Headlight Screws...anyone know what size?

MartinK

Well-known member
UKGSer Subscriber
Joined
Oct 6, 2018
Messages
2,729
Reaction score
1,368
Location
Clackmannanshire
When I bought my GS (a very last 1200 with TFT and LED headlight), I put a headlight guard on, and have since lost the original screws (I moved house!), the ones marked "A" below.


headlight fiche.png

Now I am moving to a different headlight guard, I want to re-install the OEM screws. There's no part # shown, so I wondered if any of you chaps would have a size? They look like M2.5 self tappers, about 15mm long... Just asking in case anyone could measure one, or has done the same in the past?
Cheers
 
Crikey! They're hard to find! Ordered some this morning. Thanks for your help GSian :thumby:
 
Crikey! They're hard to find! Ordered some this morning. Thanks for your help GSian :thumby:
Did you manage to find some screws? I have the same problem with my 1250 headlight as the previous owner put an awful light guard on and binned the screws.
 
Did you manage to find some screws? I have the same problem with my 1250 headlight as the previous owner put an awful light guard on and binned the screws.
Sadly I could not reasonably source the identical ones. The only ones I could find were in germany and only sold in large quantities.
So I bought M3 3mm x 14mm stainless self tapping and used them
Been perfect (y)
 
Sadly I could not reasonably source the identical ones. The only ones I could find were in germany and only sold in large quantities.
So I bought M3 3mm x 14mm stainless self tapping and used them
Been perfect (y)
Thanks for getting back to me. I guess I’ll go down the same route. Unless I buy a big bag from Germany and become the sole uk distributor 🤣
 
Thanks for getting back to me. I guess I’ll go down the same route. Unless I buy a big bag from Germany and become the sole uk distributor 🤣
£20 on ebay....https://www.ebay.co.uk/itm/142682876633
OEM part number for the screws 63 12 8 526 014
 


Back
Top Bottom