Led indicators for 11xxGS without resistors

[fernan_ci]

Hi, there´s a way to install led indicators for 11xxGS models.

- Just buy any led indicators in the market

- Replace original ones.

- And to solve fast lighting problem, instead install resistors, there is another way.

11xxGS models have 2 type of relay (for turning lights), just check yours and make this:

Take your relay:

model 1:

model 2:

mine ( model 2 ) now is like this:

and all works perfect.

P.D Information from here

 

[Roger Chatterton]

For what it's worth, I'd be VERY cautious of soldering around any IC's or chips. All too easy to blow the IC when soldering, and I'm quite used to soldering !
Heat, static or insufficient heat on the connection (dry joint !) are all too easy to occur. But, Fernan, well done if yours are working -brave man !!
Far better, IMHO to fit correct resistors to the LED's in each indicator- see Techno's posts on this -he sells finished article with correct resistors fitted on the PCB's.
I'm sure others will be along to endorse his fittings.

 

[fernan_ci]

For what it's worth, I'd be VERY cautious of soldering around any IC's or chips. All too easy to blow the IC when soldering, and I'm quite used to soldering !
Heat, static or insufficient heat on the connection (dry joint !) are all too easy to occur. But, Fernan, well done if yours are working -brave man !!
Far better, IMHO to fit correct resistors to the LED's in each indicator- see Techno's posts on this -he sells finished article with correct resistors fitted on the PCB's.
I'm sure others will be along to endorse his fittings.

Is just another way to do it. I never before solder any IC or chip, I just did it with one friend´s instructions in 2 minutes. I was thinking about resistors, but this way (without them) looks more clean for me ( I was installing a lot of things in my bike last week, I´ll post soon)

 

[Roger Chatterton]