LED mod, need a bit of electrical advice..

[rocks]

Hi Folks,
My electrical knowledge is pretty basic.

I saw these LED blocks
http://www.ultraleds.co.uk/product_...=1030&osCsid=b561022660c49b1dbbbd3a25b5281073

And would like to to add 2 or 3 to the back of the bike, prefereably one as additional break light, after near re-ending and two as standard side lights.

I already have a set of widetails on. But thinking of mounting these on the back of the TT panniers or frames.

But.. what resisters etc would i need to use. ? Anyone able to offer a quick simple wiring suggestion/diagramatic?

Cheers.. John

 

[Les Wassall]

Best thing to do is ring them at Ultraleds they are really helpfull and will sort it out for you

 

[BTBR]

Failing that, just buy some Lite Buddies from Nippy Norman.

One of the best things that I ever bought for either of my GS's.

BTBR

 

[ELIMINATOR]

Happy days........................when you were a real biker You must have a good memory

 

[BTBR]

Happy days........................when you were a real biker You must have a good memory

I've said it once and I'll say it again.....

 

[Fanum]

Rocks......VECTRALIGHTS in conjunction with a Kissan Signalminder, both from Nippy's.

Signal minder gives you all indicators running at several programmable brightnesses...... then they flash as normal...you can cancel any indicator with the same switch, and it has programmable auto-cancellation with brake override.

The Vectralights show amber forwards and red backwards, stick on curves if need be, plug straight into the signal minder and show double bright red to the rear when brakes on......as well as pulsing up and down for indicators....if you push and hold an indicator switch, you also get fast flashing for a couple of seconds for lane changing.

Thoroughly recommended.....

B