Wanted LoneRider MotoLights + Motocan
- Thread starter djgsa
- Start date
Bought them
comes with a Y-splitter
Social media influenced probablyWinner winner chicken dinner
That's an evening/weekend gone then lol.
Post pics
I think this is a thing, as I've seen a few posts online now, of a few bikes with a double ML setup.
Just to check - you have 2 of these to run 2 sets?I wonder if I started that
MT 3-Pin Y-Splitter Cable - Hex Innovate
The MT 3-Pin Y-Splitter Cable forms part of our ezCAN Spares product collection. These products are “add-on” spares available for use with our HEX ezCAN devices.
www.hexinnovate.com
No, I have one of those. Each set of lights comes with its own y-splitter so I plug one in to each branch of that new short one.Just to check - you have 2 of these to run 2 sets?
MT 3-Pin Y-Splitter Cable - Hex Innovate
The MT 3-Pin Y-Splitter Cable forms part of our ezCAN Spares product collection. These products are “add-on” spares available for use with our HEX ezCAN devices.
According to James, you need 2x Motocan or Ezcan to run these lights safely. Each set of MTL pulls 10-15 per pair, and the white circuit maxes at 15AMPs.
Yes, that's correct. The CAN will complain and shut them off, but I run both sets at 50%
That's mega bright enough. I had them both at 75% originally but I got flashed at everywhere I went. lol
If you want to run both sets at 100% then yes you will need 2 CANs
I also up'd the white channel fuse limit to 25 amps. No issues so far
Ah so you have the same brightness as my one setYes, that's correct. The CAN will complain and shut them off, but I run both sets at 50%
That's mega bright enough. I had them both at 75% originally but I got flashed at everywhere I went. lol
If you want to run both sets at 100% then yes you will need 2 CANs
I also up'd the white channel fuse limit to 25 amps. No issues so far
I am told by Hex that they are releasing a product that will let you pull power from a 2nd circuit for the white circuit data products, be in the UK next few weeks
Yeah, they are super bright. I did a few night tests down some back roads, and it was like daylightAh so you have the same brightness as my one set
That will be interesting as the Can software will only let you configure both sets of lights to the same level.
Ideally I'd want to run one set at 75% or 100% when full beam and they'd be even brighter at night.
I will keep an eye out for that product
Or run both at 100%. Literally be insane. I thought you were running them at 100% already!Yeah, they are super bright. I did a few night tests down some back roads, and it was like daylight
That will be interesting as the Can software will only let you configure both sets of lights to the same level.
Ideally I'd want to run one set at 75% or 100% when full beam and they'd be even brighter at night.
I will keep an eye out for that product
Noooooo, 100% is too much for both sets, even with the fuse set at 25 amps.
I got a software fuse error every time. "Turn it off and back on again" always fixes it.
Like I say, even in "day" mode I got flashed continuously from oncoming cars, and I've go them angled down to the right amount.
But if that new CAN thing lets me run both at 100% at full beam, I'll take that. Especially is the cost is less that anothe MotoCan
Both at 100% would be mental. You'd spot me from space lol.
Do you have the high beam set at 100% too ?No way
Nice
Do a night ride and see the difference
Hex will be releasing something new in a couple weeks timeNo way
Nice
Yep. That's high beam at 100% for all 4.
Similar threads
