Micro Indicator recommendations & Canbus Q's

[Wreford Miles]

Need some that are compatible with 1200/HP2 Canbus wiring, any recommendations.

Also need a hooter, does it need to be Canbus compatible or will any do, if so any recommendations for a loud one

And I want a power feed and power for a Zumo anything tips

Cheers

Wreford

 

[rocky burns]

Bmw r1200gs led's, have them on my 30th aniversary adventure, and they look nice.
Steble magnum horn if you want a loud one.
Zumo, I'd wire direct feed with inline fuse, just remember to turn it off when the bike is stopped.

 

[litelfun]

Need some that are compatible with 1200/HP2 Canbus wiring, any recommendations.

Also need a hooter, does it need to be Canbus compatible or will any do, if so any recommendations for a loud one

And I want a power feed and power for a Zumo anything tips

Cheers

Wreford

I no when my Brother fited som Heingerich cheep and cheerful heated grips he just used a relay because of the Canbus I all so no when Acsnitzer first fitted the Brembo radiek master cylinder they wired in a Relay uther wise the bracke lite works in revers cyclel so you might need a relay if its not canbus compatobel thats what I think !!!

 

[Wreford Miles]

I no when my Brother fited som Heingerich cheep and cheerful heated grips he just used a relay because of the Canbus I all so no when Acsnitzer first fitted the Brembo radiek master cylinder they wired in a Relay uther wise the bracke lite works in revers cyclel so you might need a relay if its not canbus compatobel thats what I think !!!

I also need to sort out the brake light from the front brake as it has a fantastic single disc set up and new lever/master cylinder which has a twin terminal switch against the BMW one which has a single electrical connection on the switch.

 

[*John*]

micro indicator

I have been using a set off a gas gas enduro bike, they take the same bulb as the standard one so no issue with the can bus. They also have survived a fair bit of off road battering. They came standard with all gas gas enduro bikes but very few fitted them so it should be handy enough to pick up a set.

 

[*John*]

Zumo

And I want a power feed and power for a Zumo anything tips

Cheers

Wreford

forgot to say

I spliced into the wiring at the back on the auxiliary plug near the battery this way it shuts down a few minutes after you turn off the bike

 

[Wreford Miles]

I have been using a set off a gas gas enduro bike, they take the same bulb as the standard one so no issue with the can bus. They also have survived a fair bit of off road battering. They came standard with all gas gas enduro bikes but very few fitted them so it should be handy enough to pick up a set.

Thank you... Now looks like Ill be using Ones of an XC

Re the zumo the local BMW dealer pointed out that I had a 'tool' power fed and could use that so Ive bought a connecter - no one knew why its called a 'tool'

 

[Wreford Miles]

KTM adv indicators fitted

Zumo power feed taken from the tool

Brake light switch nearly resolved