FurryFox
Registered user
Which size?
Missing retaining clip on passenger foot peg pin. 2022 1250GS
- Thread starter camphair
- Start date
i realy cant remember
if you go onto your e bay purchase history that will go back a couple of years and it should tell you the size on the order placed.
Had at least two GSA’s with missing clips from new.
6mm
Thanks fizzer, i'll get a pack ordered.
I ordered a variety pack from Amazon a few weeks ago and I found the thickness was greater than the width of the slot. I think we need to know the thickness spec in addition to the diameter.
If no one else has measured yet, I can do it.
I had a recall notice on this item for my F900xr last week.
Mate had one on his 1200lc as well
not shared with the Germans , Luigi was pissed and put a cracked one on.
I had one for my RT ... It looks like they're all being recalled for new clips
PS I checked mine and all four are still in place
Fitted proper circlips and lock wired the fuckers on, can’t be doing with footrests flying off when I crash.
Their is a recall for the clips reference on the letter 0046630000
Had a recall letter today for my R1250GS for the foot peg security clip replacement, a rather dramatic envelope it was too.
Essentially says, check the rider and passenger foot pegs ,and get along to a dealer who should be able to do a while you wait replacement
Essentially says, check the rider and passenger foot pegs ,and get along to a dealer who should be able to do a while you wait replacement
ilkleymoron
Registered user
Mine is a 21 reg GS with only 7500 miles on it. Foot pegs are the 719 option and both were missing the E clip that BMW used. Bought in some 8mm circlips and a pair of circlip pliers for £10 total and replaced myself…..not worth a 2 hour round trip and waiting for an hour lol
BMW are blaming the loss of clips on corrosion - in my case it certainly was not corrosion, it was 'non-springy' clips, once pushed into the slot they had been expanded beyond their elastic limit - this happened a few times and eventually my dealer managed to find some clips that stayed in place. I first reported this 2 years ago; why it has taken BMW this long to get around to acknowledging the problem is somewhat surprising and then blaming it on corrosion, hmmmmmmmm.
Just had the letter for a 2023 bike. I have put GSA rear pillion hangers on too, so they’ll have them and the original GS rear pillion set todo.
