Sold Motolug Bike trailer

[Norm]

Can be made into a double bike trailer.
The trailer breaks down as per photos for storage and transport.
Collection from Derbyshire but I’m happy to help with a meet up within a sensible distance of paid for before meeting.
It’s been used a once Sheffield to Manchester and back - FFS !!!
It’s been stored in garage and has a bit of oxide which willl brush off.
Main thing to note - I have mislaid some of the fitting kit - pins and bolts but it can be purchased from motolug - not expensive

£600 collected

 

[drdaveboy]

Thats a bargain , I take it you have the centre axle part , motolug have ceased trading but I'm sure the pins could be got easily , i.bought extra pins with mine just in case I lost any

Sent from my SM-S948B using Tapatalk

 

[Oldrat]

That Norm, is a steal and very under priced.

 

[GSite]

PM sent, very interested

 

[Norm]

Pm not received ??

 

[MikeS]

I take it you have the centre axle part

That is a fairly fundamental part so hopefully Norm can find it as that trailer looks very good.

 

[GSite]

PM went 43 mins ago so possibly delayed but just sent again.

 

[Norm]

Ok there is plenty of interest and lots of questions.
I wasn’t planning on explaining further but …
Due to divorce, moving house, shed storage and other chaos (major surgery) means I do not have all of the pins & bolts and now the centre axle
I will explain ….
I’ve been out this morning and identified what’s missing and where, I recognise the centre axle that connects the two wheels is not with me FFS wife got that in the divorce.
There is a centre pin missing that goes through the trailer and through the axle
8 Bolts missing for number plate and rear light set up.

So there is a first interest and then many 2nd dibs but I understand the trailer is not complete as I said in my first post.

So to get it off my hands and let someone else sort it out I think the fairest thing is to say £450 to the first person that says I’ll have it as it is - ideally here rather than pm and it can be seen.

Picture one is example Of the axle box tube
Picture two is an example of the rear light set up
Picture 3 is the position of the centre pin

 

[Norm]

Excellent video of the trailer set up and dismantling.

 

[Oldrat]

I’m sure that the box section is a standard size and would be readily obtainable from metal suppliers such as Metal Supermarket. Just a case of drilling the holes.

The pins and R clips should also be easily sourced.

I’m happy to supply dimensions etc if needed

 

[Oldrat]

I’m sure that the box section is a standard size and would be readily obtainable from metal suppliers such as Metal upermarket. Just a case of drilling the holes.

The pins and R clips should also be easily sourced.

I’m happy to supply dimensions etc if needed

 

[leadfarmer]

Can’t you just ask the ex for the bits that are missing? At least the axle, I don’t suppose she needs it

 

[Norm]

I’ll give you her number
She’s very reasonable

 

[dicktheleg]

I’m sure all the bits are available from motolug, they’ve been very helpful when I’ve contacted them.

If it’s of any interest I’ve replaced the 3 axle clevis pins on mine with bolts and nylock nuts.

Takes a few mins more to assemble but it’s more rigid and had less rattle.

 

[neil 23]

I’ll take it please.

 

[MikeS]

I’m sure all the bits are available from motolug, they’ve been very helpful when I’ve contacted them.

If it’s of any interest I’ve replaced the 3 axle clevis pins on mine with bolts and nylock nuts.

Takes a few mins more to assemble but it’s more rigid and had less rattle.

They have gone out of business apparently according to an earlier post in this thread.

 

[Nice 'n' Fat]

I'm pretty sure I have a brand new Motolug axle in my lockup

 

[neil 23]

I'm pretty sure I have a brand new Motolug axle in my lockup

That would be a great help, please let me know.