Need help identify .

beemer pimp

Registered user
Joined
Jul 27, 2013
Messages
437
Reaction score
0
Location
Dublin
Alrite All.
Can anyone help to identify plug on bottom right hand side of the engine , it's on posit side of return oil pipe banjo bolt ,
Had look on realoem and I think there spring and piston there like chain tensioner , I want take plug out to change washer, it seeping oil.
Don't want end up taking engine apart
 
I think we need a picture... Can you post one. The brains on here will find it easier to help!



Sent from my iPad using Tapatalk
 
I think we need a picture... Can you post one. The brains on here will find it easier to help!



Sent from my iPad using Tapatalk
Hop this help.
1f08859ecf4db14581226c506abcc98c.jpg

Rusty plug on side sump , this picture from the net , bike in shed and its to cold out
 
Oil pressure relief valve. You can remove it, there is a spring behind it and a plunger, also a big copper washer that sounds like it needs replacing or re-annealing.
 
Not sure if you can see picture , but I thin it's 8mm alen key plug on the left side if you face bike from the front .
 


Back
Top Bottom