never done any merchanics

BAKERMAN

Well-known member
UKGSer Subscriber
Joined
Jun 28, 2002
Messages
16,873
Reaction score
100
Location
Andover Hampshire, Real ENGLAND
before, but my KTM of 10 years standin in garage would not kick over, think its seeed up, so put some WD 40 around that round bit think its the piston what do I do next ?
 

Attachments

  • DSCN1906 ktm.JPG
    DSCN1906 ktm.JPG
    68.6 KB · Views: 281
Buy a box of Bryant & Mays finest.

Although, seeing as it's a KTM, a box of swan vesta's will do
 
I'm not a mechanic either but I'm sure theres a bit missing of your Katie Emm :)
 
the seats missing and your carburettor's on all bent.

fix all that first - never mind your so called pistons :mmmm
 
There's a bit missing at the top, you've lost compreshun

...I prefer your stock response to his threads...........oaf :D
 
Ste@SSB said:
Just leave it overnight with some deisel or parafin in it ... or whatever oily cack you have ... then hit it with a block of wood...

Like wot he said but put the wood in the hole and then hit it with a hammer as sqarely as u can. Once its free have the barrel off (thats the bit around the round thing) and make sure your rings are in one piece. stuff some rag around the con rod before you lift the barrel right of , cos if they are in bits they will make a lovely little tinkling sound as they descend into the sump.
This done take a bucket of petrol and throw it over the lot and as Steptoe suggest use a swanvesta on it.

Good luck and good night
 


Back
Top Bottom