will be fitting a nn autoswitch over the chrimbo break ,the instuctions are a slightly unclear(to me anyway)as to the colour of the trigger wire from the indicator relay ,can anyone help ,the bike by the way is a 2004 1150gsa thanks in advance chaps
nippy normans autoswitch
- Thread starter autogs
- Start date
HR0
Registered user
BTBR will be along in a bit
BTBR 
will be along in a bit
He knows all you need to know and in plain english
.
so plain even i was able to fit it all, he helped me out with my lighting set up ( that he origionally made)
he has a very clear PDF that he was kind enough to share with me.
it has colour pictures and everything
best of luck
take your time, and warm up the fuse / relay carrier, makes life easier esp this time of year.
May be asking if he can add my FF50's and FF75's to my F800 GS when it arrives
H
BTBR will be along in a bitHe knows all you need to know and in plain english
.so plain even i was able to fit it all, he helped me out with my lighting set up ( that he origionally made)
he has a very clear PDF that he was kind enough to share with me.
it has colour pictures and everything
best of luck
take your time, and warm up the fuse / relay carrier, makes life easier esp this time of year.
May be asking if he can add my FF50's and FF75's to my F800 GS when it arrives
H
autoswitch
thats great all the info i needed thanks for pointing me the right way
thats great all the info i needed thanks for pointing me the right way
techno
Registered user
No need to cut any wires...
Take a look here: http://gsclubuk.org/forum/showthread.php?t=26924
Reply #10 you will see how I did it without cutting the loom.
A much better and neater solution. Well that is until your flasher relay packs up and you have to solder the wires on again. A very complex flasher relay if you ask me.
I have had it like this for nearly a year and no trouble so far.
Take a look here: http://gsclubuk.org/forum/showthread.php?t=26924
Reply #10 you will see how I did it without cutting the loom.
A much better and neater solution. Well that is until your flasher relay packs up and you have to solder the wires on again. A very complex flasher relay if you ask me.
I have had it like this for nearly a year and no trouble so far.
Autoswitch Help!!!!
Must be to many mince pies turning me into a thicko today, but can anyone help me out?
I have been following the instal document as per the link above, and I have fallen at the last hurdle.
I have all the wires connected, but am confused about the last 2.
It says brown - black ( relay/Autoswitch)
The thing that has me confused, is the wiring diagram with the switch says to connect the black wire from the autoswitch to the relay
whilst the installation guide above looks like you have to connect the black wire to the bikes loom, along with a brown wire?
so,
where does the black wire from the autoswitch go to?
do i need to connect the relay to this wire?
what is the brown wire?
Please help!!
Many thanks in advance
Paul
Must be to many mince pies turning me into a thicko today, but can anyone help me out?
I have been following the instal document as per the link above, and I have fallen at the last hurdle.
I have all the wires connected, but am confused about the last 2.
It says brown - black ( relay/Autoswitch)
The thing that has me confused, is the wiring diagram with the switch says to connect the black wire from the autoswitch to the relay
whilst the installation guide above looks like you have to connect the black wire to the bikes loom, along with a brown wire?
so,
where does the black wire from the autoswitch go to?
do i need to connect the relay to this wire?
what is the brown wire?
Please help!!
Many thanks in advance
Paul
Similar threads
