Non-bike related Free Stuff ........

R1200GS '05' standard front shock adjustment tool

252295cb7e57d2c9f48ade9250d84e57.jpg


Free to collect near Loughborough.

Or the next east midland cafe meet!
 
Shock tool?

Would it go in a jiffy bag for a large letter postage? I'd like it if you wouldn't mind posting, or let me know where the east mids café meets happen and I'll try to get there?

Cheers,
Keith.
 
Flipfly said:
1 large system 5 going free and gratis if anyone is interested, it's silver and fits on ya noodle to stop you hurting your head on the way out of low doors.

It's never been crashed or dropped but it does have a small scuff on it. It's not new, maybe you just want it for spares, who knows, but it's here and available for collection from Stoke on Trent if anyone wants it.
Click to expand...

Yes please- where about in Stoke - I am traveling to Twickers tomorrow, and can divert via the D road.

Thanks
 
After reading and contributing to the dirty bike thread I have realised my Halfords special pressure washer is not up to the standard expected of GSA WC owners :D. Being the poofter and space wasting knobhead outcast of a GSA WC owner I am, I'm offering this for free hoping I would be forgiven. Fat chance I know :D

I have owned this for about 5 - 6 years I think. The hose sleeve has split but does not affect the functionality of it. The pressure washer works as advertised. Strong enough to blast dirt and mud of the car or bike. It came with a foam bottle and brush. These are included. There is a filter I have to dig out that will go with it. Free to collect from Bedford UK. I don't fancy going through the hassle of mailing such a thing.





 
I have a set of four Audi alloy wheels that are corroded around the rims and leaking air, so in need of a refurb. They are currently fitted with part-worn Conti winter tyres.

Wheel size is 16 inch to fit 205/5R16 tyres suitable for many VW/Audi/SEAT/Skoda models. 5 bolts on a 112mm PCD.

I bought them for my old car but never got them refurbed, and they won't fit my new one. A refurb will cost £250 to £350 depending on who you ask.

Free to anyone who takes them away, otherwise off to the tip.

Located just north of Bristol.

Thanks,

i-DjmB5SP-L.jpg
 
Hi All,

I'm offering a set of CNC Alu short brake and clutch levers for a 650GS. The levers are about 120mm total length, 70mm finger space.

25123794743_7543f2ddfd_z.jpg


Described on the original shop advert as:

Billet Short Brake Clutch Levers For BMW G650GS 08-14 F650GS 00-07

I tried to fit these to my 2014 G650GS but they weren't an exact fit. The pivot hole on the clutch lever is too large so there is a lot of excess movement, could potentially be solved with an internal collar? The 'nub' designed to fit the clutch switch was also slightly off, but was close.

As a result, I'm offering these on here for free, postage only. Hopefully, somebody can repurpose them. They look great and feel well made, so I'm sure that somebody can get them onto something.

Collection possible from Winchester, Hampshire or I'll get them posted - likely to be about £3 I'd suspect.

I'd love to see a photo of any bike that they end up on!
 
Grizzly GS said:
I have a set of four Audi alloy wheels that are corroded around the rims and leaking air, so in need of a refurb. They are currently fitted with part-worn Conti winter tyres.

Wheel size is 16 inch to fit 205/5R16 tyres suitable for many VW/Audi/SEAT/Skoda models. 5 bolts on a 112mm PCD.

I bought them for my old car but never got them refurbed, and they won't fit my new one. A refurb will cost £250 to £350 depending on who you ask.

Free to anyone who takes them away, otherwise off to the tip.

Located just north of Bristol.

Thanks,

i-DjmB5SP-L.jpg
Click to expand...

PM sent.
 
tPIC said:
Hi All,

I'm offering a set of CNC Alu short brake and clutch levers for a 650GS. The levers are about 120mm total length, 70mm finger space.

25123794743_7543f2ddfd_z.jpg


Described on the original shop advert as:

Billet Short Brake Clutch Levers For BMW G650GS 08-14 F650GS 00-07

I tried to fit these to my 2014 G650GS but they weren't an exact fit. The pivot hole on the clutch lever is too large so there is a lot of excess movement, could potentially be solved with an internal collar? The 'nub' designed to fit the clutch switch was also slightly off, but was close.

As a result, I'm offering these on here for free, postage only. Hopefully, somebody can repurpose them. They look great and feel well made, so I'm sure that somebody can get them onto something.

Collection possible from Winchester, Hampshire or I'll get them posted - likely to be about £3 I'd suspect.

I'd love to see a photo of any bike that they end up on!
Click to expand...

You need the collar from the single spark bikes for the clutch pivot hole and the nub can be ground to shape. I've got the same ones and they fit well (now).
 
Hammer and plug fixings

5 boxes, varying quantities, but there's got to be 300+ fixings there. M8x120, m10x115, m10x160. Free to collect from Ombersley or they're in the skip.

D5595F2F-30BA-40B8-8137-D8974A8A4134_zpsxj6kq8aq.jpg
 
Bmgsrider said:
Or give them to a passing builder rather than dump.
Click to expand...

I am a builder. :D Just don't use these type of fixings anymore so was hoping to pass them on. I hate chucking stuff but I've got too much old leftover stock from projects.
 
Nippy Normans supply Touratech, Wunderlich, Desert Fox and many other makes of accessories.
You must log in or register to reply here.

Similar threads

kwackanut
For Sale Bike related FREE STUFF. R1200gs exhaust link pipe
Replies
3
Views
355
JohnnyBoxer
JohnnyBoxer
kwackanut
For Sale Bike related FREE STUFF…Ktm 990 wheel brg kit
Replies
2
Views
345
kwackanut
kwackanut
For Sale Bike related free stuff
Replies
10
Views
947
GreyHairedWombat
younger06
Non bike related request (car tyres)
Replies
9
Views
1,194
younger06
younger06
Non bike related trip to Tallinn
Replies
12
Views
5,995
limoncello


Back
Top Bottom