Non-bike related Free Stuff ........

Schuberth Concept
Metallic blue size 58/59cm
Used for about 6 months and then lurked in the cupboard for a number of years. A few dings and scratches but generally ok.

P1000616.JPG


Seems a shame to chuck it
 
Adapted Autocom lead

Adapted Autocom headset extension lead.
Adapted to allow the audio out from a mono 3.5mm audio source to play into one (or both ....can't remember!) of the helmet speakers. The helmet microphone still goes to the autocom. I used it to practice giving clear commentary over a vox'd PMR446 radio link with an autocom.
Could be useful to somebody as is or adapted to allow a stereo source if you don't have autocom on the bike all the time.
I can'd find the wiring diagram I used to splice the wires, but have seen it mentioned on this site a couple of times.

20100514_001.jpg
 
Adapted Autocom headset extension lead.
Adapted to allow the audio out from a mono 3.5mm audio source to play into one (or both ....can't remember!) of the helmet speakers. The helmet microphone still goes to the autocom. I used it to practice giving clear commentary over a vox'd PMR446 radio link with an autocom.
Could be useful to somebody as is or adapted to allow a stereo source if you don't have autocom on the bike all the time.
I can'd find the wiring diagram I used to splice the wires, but have seen it mentioned on this site a couple of times.

20100514_001.jpg

Hi,
Can I have that too...?
Ta
 
touratech aux switch mount

as it says above, originally came with the tt aux lights i purchased for my dakar. Will fit 22mm dia bars. Mount for the switch is a 12mm dia hole.

867602242_8afut-XL.jpg


The mount is worth £50,000,000 but anyone on here can have it for nowt :thumb2

I may even throw in a couple of stainless fasteners if i can find some. :D
 
as it says above, originally came with the tt aux lights i purchased for my dakar. Will fit 22mm dia bars. Mount for the switch is a 12mm dia hole.

867602242_8afut-XL.jpg


The mount is worth £50,000,000 but anyone on here can have it for nowt :thumb2

I may even throw in a couple of stainless fasteners if i can find some. :D

iv a use for that, can i have it?
 
Ford Ranger Mk 2 Double Cab Load Liner and Tailgate Liner

A few marks but basically as new. I also have a rear window that has a sliding opening section. All bought as spares but not needed and cluttering up our soon to be sorted out garden. Collection only from Ombersley, Worcestershire. Can post pics if really needed.
 
free single rear van seat withseat belts

Anyone need/want a single rear van seat.
bolts direct to floor pan and complete with it's own integrated seat belt.

Seat has been sat in my shed for a couple of months so could do with a clean but otherwise in good nick,

Will need to be collected from Gainsborough, Lincolnshire.
 

Attachments

  • seat 001.JPG
    seat 001.JPG
    104.5 KB · Views: 157
  • seat 003.JPG
    seat 003.JPG
    116.7 KB · Views: 156
11XX Fuel filter, "O" Rings and crush washers

if you want 'em, they're yours for the postage.

IMG_0699.jpg
 
Daytona Roadstar boots

I think these are a size 44 or 45, they are very well worn but have some life in them still. Yours for the postage, or better still come and pick 'em up.

IMG_0719.jpg

IMG_0718.jpg
 


Back
Top Bottom