Non-bike related Free Stuff ........

BMW GS gloves sized 8 - 8 1/2. I'd say they equate to a medium. Small wear through on the bottom of the left index finger but more than serviceable for off road use/green laning if you're starting out. Cover the cost of whatever the postage is.

3C2EDCB9-283E-40CB-AE75-445F9D21138E_zpsdyrlvw4c.jpg


4F0DCA61-D13A-482D-824D-C7C0C27A315C_zpsbjwydhiu.jpg


Tuzo TZG4 gloves, thinsulate and hipora, size large. Cover the cost of whatever the postage is.

5CD9A7FC-DE94-434D-81BA-C77C8AA1A38D_zpsyvmu36xk.jpg


Hein Gericke Tuarag jacket with waterproof liner, no armour, sized medium. Been used off road a lot but more than serviceable for off road use/green laning if you're starting out. Collection from Ombersley, Worcestershire.

D8C0E7EE-24F0-42C3-A5CA-231CA3D9F4DD_zpsgrgyxmiw.jpg


EVS Flux roost vest, medium. I've no idea where it came from and I'm sure I've never worn it! 2 of the rear shoulder rivets missing are cable tied but works as it should. Collection from Ombersley, Worcestershire.

18A83430-8AD1-436F-9371-8A7BFD252D3B_zps94epfcjp.jpg

Gloves spoken for. Jacket and roost vest still available.
 
Empty bike trailer going from Grimsby to Newcastle, Friday.

As it says really- I am off oop norf tomorrow to view a bike and hopefully bring it back on the trailer, so if anyone can make use of the empty trailer on the journey north let me know.
Trailer might be empty on the way back down if the bike is not as it seems in the pics.....

A bit short notice but only just arranged it today.
 
I've got a built-in fridge freezer going free. Works perfectly, just needs a lightbulb! Collection from Haslingden in Lancs. cheers!


Sent from my iPhone using Tapatalk
 
Sorry, major mistake in that last post. It's a single built in FRIDGE , not a freezer!

Width - 59cm
Height - 82cm (adjustable up/down at all four corners)
Depth - 54cm from the back to the front of the door facia hinge, 56cm if you factor in your door facia (not included)

I'm unsure of the make, it's been in since we moved into the house last year. Works absolutely perfectly, just needs an interior bulb.

Collection from Haslingden in Lancs.

Cheers!
Mike
 
Side stand Foot Enlarger. Got it here for free with proviso of te offering if it didnt fit. Bugger. IT DOES NOT FIT my 2010 GS. Free posted to UK. No idea what it fits.
49813aad6a2ab397a93917466fff73d6.jpg


Sent from my SM-G920F using Tapatalk
 
Side stand Foot Enlarger. Got it here for free with proviso of te offering if it didnt fit. Bugger. IT DOES NOT FIT my 2010 GS. Free posted to UK. No idea what it fits.
49813aad6a2ab397a93917466fff73d6.jpg


Sent from my SM-G920F using Tapatalk

Could I take that please Don. PM sent.

Thanks,
Keith.
 
Click Freestanding Velcro Display Boards

Need to make room in the shed for my new RD125LC project :D

I've got 4-5 lots of Click Velcro Display boards in the original wheeled carry cases.

They're in blue and look pretty much like the attached picture. Some have holes drilled where equipment has been mounted but most just have printed display boards velcro'd on.

Look pretty much like the pic when setup and they're blue, 4-5 lots of 4 boards I think. Buried in the shed and it's raining so can't get them out for a proper pic at the moment.

Collection only I'm afraid.

Cheers,

Phil
 

Attachments

  • Boards.jpg
    Boards.jpg
    47.4 KB · Views: 186
Back inversion table

Cheap back inversion table. Great for stretching out your lower back if you have problems but mine is ok now.

Same as pic but blue.
 

Attachments

  • 81lfOpmvirL._SY355_.jpg
    81lfOpmvirL._SY355_.jpg
    16.7 KB · Views: 564
Need to make room in the shed for my new RD125LC project :D

I've got 4-5 lots of Click Velcro Display boards in the original wheeled carry cases.

They're in blue and look pretty much like the attached picture. Some have holes drilled where equipment has been mounted but most just have printed display boards velcro'd on.

Look pretty much like the pic when setup and they're blue, 4-5 lots of 4 boards I think. Buried in the shed and it's raining so can't get them out for a proper pic at the moment.

Collection only I'm afraid.

Cheers,

Phil
Yes please if still available.
 
This exhaust can came with a recent purchase of a 1150GS for some reason. Looking on google for the part number it appears to be for a F800GS. Perhaps will fit other :nenau
Few marks and no good to me so collection or local meet up
 

Attachments

  • IMG_6358.jpg
    IMG_6358.jpg
    38.7 KB · Views: 564
  • IMG_6359.jpg
    IMG_6359.jpg
    40.6 KB · Views: 561
I've got a double divan bed frame and headboard that I need gone - good condition, it has 4 drawers. Breaks into 2 sections, so might fit into a large estate. I'll put some photos up in anyone needs to see, but it's a standard double bed frame, nothing fancy. Stoke on Trent collection.
 
Used R1100 injector

Passed to me by a colleague who bought it for his R1100 and never fitted it. Happy to post.
 

Attachments

  • IMG_20170122_101406.jpg
    IMG_20170122_101406.jpg
    33.3 KB · Views: 361
Motorised Satalite Dish

Motorised Satalite Dish.

Channel master 1 meter solid dish with polar mount ,quad LNB , wall mount. The motor has siezed but if you have access to a lathe a new ram can easily be made.

Located Leeds area.
 

Attachments

  • d1.jpg
    d1.jpg
    122.5 KB · Views: 350
White plastic garden table and chairs

I have a faded but solid white plastic garden dining table 4ft by 2ft 6in along with 6 equally faded and stable chairs. No longer very white but very serviceable.

Free to collect from Brentwood, Essex. Table legs remove for transport and storage.

chairs.jpeg
table.jpeg
 
2 x metal roof-mounted bike carriers

Basic metal pushbike carriers that attach to roof bars. Attachment rings are present. No locks or fancy features but in full working order with no rust. Very stable at 80mph, have been used for several holidays on the continent.

Free to collect from Brentwood, Essex. I won't wrap or post as too much of a pain in the arse.

bikecarriers.jpeg
 


Back
Top Bottom