Non-bike related Free Stuff ........

[fizzer]

hi fi speakers

a pair of speakers ,free,for nowt ,gratas
you pick them up here in co durham
ian 07825037159

 

[fizzer]

a pair of speakers ,free,for nowt ,gratas
you pick them up here in co durham
ian 07825037159

if no one wants by the morning of the 5march i will take to the tip

 

[Grizz]

if no one wants by the morning of the 5march i will take to the tip

Silly question, or not maybe.

The driver unit on the floor, is that going out, busted etc?

I am looking for just a radio driver to replace the one in my garage as mine’s power switch has stopped working.

Radio 2 is all my garage needs

 

[fizzer]

Silly question, or not maybe.

The driver unit on the floor, is that going out, busted etc?

I am looking for just a radio driver to replace the one in my garage as mine’s power switch has stopped working.

Radio 2 is all my garage needs

well the speakers are spoken for ,the driver unit on the floor is fine mate you can have it ,just pay for the postage send me your address and i will get it away one day this week

 

[Grizz]

well the speakers are spoken for ,the driver unit on the floor is fine mate you can have it ,just pay for the postage send me your address and i will get it away one day this week

Thank you very much mate.

 

[Nin]

Hi folks

I have some 26” Schwalbe city jet tyres. Unused but have been sat outside (not in the sunlight). Collect from Abingdon only.




Sent from my iPhone using Tapatalk Pro

 

[Nin]

Hi folks I have a pair of 650B mtb wheels and good tyres. Rear wheel will need a new cassette and fittings.

Collection only from Abingdon.

 

[snakebasket]

PM sent

 

[shakey]

Water storage tank thing

Is this any use to anyone?

I bought it to provide a water source in my garage to save me getting the hosepipe out after each ride. Worked well but no longer needed.

No idea what the capacity is but would guess that it’s at least 50 litres.

I’m in Chatham if you want to collect it and make use of it.

 

[sparkplug]

That could be of interest shakey

do you have approx dimensions?

also - do you have the cap for the filler hole?

 

[wildbeeste]

Very Old Compression Tester

I used this on my old two strokes and MGB roadster
It worked well but no idea as I have not used it for over twenty years as the box shows
Prefer collection from Hove/Brighton but will post it for a small donation to the Sally Army or Prostate Cancer or any other charity you want.

 

[bigive]

Yes please if you can post.

 

[Grizz]

Is this any use to anyone?

I bought it to provide a water source in my garage to save me getting the hosepipe out after each ride. Worked well but no longer needed.

No idea what the capacity is but would guess that it’s at least 50 litres.

I’m in Chatham if you want to collect it and make use of it.

That could be of interest shakey

do you have approx dimensions?

also - do you have the cap for the filler hole?

I know a guy up the road in St Mary Hoo who could hold it for you Fil, unless shakey is OK storing it.

 

[Nin]

PM sent

Cheers - wheels and tyres now spoken for.


Sent from my iPhone using Tapatalk Pro

 

[shakey]

I know a guy up the road in St Mary Hoo who could hold it for you Fil, unless shakey is OK storing it.

I don’t have the cap I’m afraid but it also needs a bit of basic plumbing.
Happy to carry on storing it, it’s not going anywhere

 

[sparkplug]

Plumbing isn't an issue and the cap might not be either - but dimensions are going to be what makes or brakes it being useful to me.

I need to get down to St Mary Hoo at some point and might have found a sneaky way of making it over to Exeter first under the guise of 'work' so if the dimensions are good and you don't mind holding on to it for a couple of months (or meeting up with Grizz in the interim) then it could be a very convoluted plan in the making of moving 'perfectly good stuff' around

 

[shakey]

Plumbing isn't an issue and the cap might not be either - but dimensions are going to be what makes or brakes it being useful to me.

I need to get down to St Mary Hoo at some point and might have found a sneaky way of making it over to Exeter first under the guise of 'work' so if the dimensions are good and you don't mind holding on to it for a couple of months (or meeting up with Grizz in the interim) then it could be a very convoluted plan in the making of moving 'perfectly good stuff' around

Hi

Sorry for the delay, work got in the way.

Dimensions are:

Its narrowest side is 30 cm
It stands 60 CM high
Its longest side is 76 cm
It has a 2 cm lip at the bottom edge that stands proud of these dimensions.

 

[agent2494]

I have around 600 of this softwood timber 75mm x 100mm x 1000mm long it’s to good to throw in the skip.
Newcastle (Washington area)
Pm if you want it


Sent from my iPad using Tapatalk

 

[sparkplug]

cheers shakey

I'll have a measure up at the weekend and confirm.

Obviously, if someone else says 'yes please' in the interim then I won't be upset.

First one to claim it gets it

 

[Joe narvey]

I have around 600 of this softwood timber 75mm x 100mm x 1000mm long it’s to good to throw in the skip.
Newcastle (Washington area)
Pm if you want it


Sent from my iPad using Tapatalk

That’s bloody dangerous Jenga set you have there. Could really hurt if one of those fell on your head.