Non slippy footpegs

[MF-Racing]

Hi guys,

I’m finding the pegs on my 1250GS to be really slippy when standing up and wet I like the rubber to help with vibes. Any one used these, looks like best of both worlds?

https://www.bahnstormer.co.uk/product/r-1200-1250-gsgsa-lc-adjustable-footrests-set-black/

Thanks

 

[Victor c]

I have a set, which I fitted to my GSA after the original foot pegs chewed up the bottom of my boots. They are well made and fit perfect. However, I find I can’t use them in the lowest position, as the non adjustable rear brake pedal becomes too high to operate comfortably.

I have used Bahnstormer several times for online purchases, and always had excellent service. If you google 44 teeth discount code, I’m sure they have a code for them.

 

[MF-Racing]

I have a set, which I fitted to my GSA after the original foot pegs chewed up the bottom of my boots. They are well made and fit perfect. However, I find I can’t use them in the lowest position, as the non adjustable rear brake pedal becomes too high to operate comfortably.

Thanks! Are the ok in the normal position? Cheapest place to get them from?

 

[Victor c]

I have mine set to middle hole (10mm lower than standard) and they feel fine. I’m pretty sure that if fitting to std GS, you need different springs for the pivot pin. Mine came with them in the box.

 

[MF-Racing]

Thanks!

 

[Nutty]

I had them on my Rallye, and they were very good. Just make sure you keep the spring lubricated, as they can become stiff if you don’t.

 

[rocky burns]

Just put a set of gsa ones on it.

 

[ReGenesis]

Fin the Rallye ones fine.
Had the Touratech long distance ones on the 1200 and they were brilliant.
Was keeping them for the Rallye as they’re 20mm lower but no bigger in overall size, however so far the Rallye’s seem good enough to not need them.

 

[Nutty]

Pivot Pegz also get my vote, and I’ve had them on the last couple of bikes.

 

[MF-Racing]

Thanks guys. Ordered the ones from barnstormer with 5% discount code.

 

[Bobbin-Man]

However, I find I can’t use them in the lowest position, as the non adjustable rear brake pedal becomes too high to operate comfortably

I have them fitted to my GS and they're great pegs but I also found a problem on the lowest position in that my left foot fouls the side stand when trying to change up gears, middle position is fine (Sidi Adventure boots).

 

[Delboy777]

I have mine set to middle hole (10mm lower than standard) and they feel fine. I’m pretty sure that if fitting to std GS, you need different springs for the pivot pin. Mine came with them in the box.

You are correct, the springs you need are for the GSA, the GS ones will not work DAHIK

 

[MF-Racing]

You saying they won’t work with my GS?

 

[Delboy777]

You saying they won’t work with my GS?

No thats not what im saying. You will be supplied in one of the boxes a set of GSA springs that you need to use. I tried for more than half an hour to try and fit the GS springs before i found the other springs in ONE of the boxes. Unfortunately it wasnt the first box i opened. So when you get them check which box the springs are in and use them, because your GS ones will NOT fit

 

[MF-Racing]

No thats not what im saying. You will be supplied in one of the boxes a set of GSA springs that you need to use. I tried for more than half an hour to try and fit the GS springs before i found the other springs in ONE of the boxes. Unfortunately it wasnt the first box i opened. So when you get them check which box the springs are in and use them, because your GS ones will NOT fit

Ok thanks. So you saying I need to use the GSA springs with my GS??

 

[Delboy777]

Yes


Sent from my iPhone using Tapatalk

 

[MF-Racing]

Seems a bit odd! But ok thanks.

 

[Delboy777]

Seems a bit odd! But ok thanks.

Your welcome to try and fit the GS ones, as ive said been there done that.


Sent from my iPhone using Tapatalk

 

[MF-Racing]

Haha! Will let you know. Thanks.

 

[MF-Racing]

Right so fitted the pegs. Left one all good, spring tension for folding all good. On to right hand side, and what ever way I put the spring in the tension is just pretty floppy, hardly any tension at all. What I am doing wrong?

The pegs came with one set of springs, both of which are the same.

See videos here:

https://www.dropbox.com/s/7qoqfoap1fl0v7u/Video.mov?dl=0

https://www.dropbox.com/s/fq879jtdbv4wh9f/Video_1.mov?dl=0

Thanks!