nothing ever goes to plan(abs)

bart2181

Active member
UKGSer Subscriber
Joined
Jun 29, 2008
Messages
469
Reaction score
10
Location
birmingham england
hiya,thought i,d attack my problem with abs not always reseting,checked front abs and the gaps a mile out:confused:anyway can,t shift the little bugger and it looks like the only way of reseting to correct gap is smashing sensor out and replacing:augieany ideas before i get me big hammer out:D
 
Try pouring a couple of kettles of boiling water over it, I mean you can get progressively more drastic with it, you have nothing to lose, how about rotating the fork leg to get at it from the other side ?
Stewart
 
You won't be the first person to have experienced this - I wouldn't go into destruction mode just yet - hopefully pearls of wisdom will be forthcoming (but not from me, as I've not faced this problem).

cheers
Matt
 
Er, is your battery fully charged and in a good condition?? :augie

Serious question :)
 
yes mate,batterys bang on,only started playing with sensor has theres a gap of about 2mm between sensor and disk.i might be pissing up the wrong tree but sensors about the easiest thing to check(or so i thought):(
 


Back
Top Bottom