Nuts and Bolts?????????

[Banger]

Where do you get them?

I am in surrey/Kent and i need to find a store that sells them, strange question i know but cant seem to find this specific bolt anywhere. So where do you GO?

I have tried bike shops , diy etc with no luck.

I am looking for Two 6 X 1.0 X 95mm Bolts and Two 25mm spacers.
And 2 rubber grommets although not essential

I am fiddling around with the Front Fender on My MotoX Bike and just cant get hold of them.

The bolts can be all thread or last half end threaded.

Anyone put me in the right direction

TA!

 

[JohnnyBoxer]

Where do you get them?

I am in surrey/Kent and i need to find a store that sells them, strange question i know but cant seem to find this specific bolt anywhere. So where do you GO?

I have tried bike shops , diy etc with no luck.

I am looking for Two 6 X 1.0 X 95mm Bolts and Two 25mm spacers.
And 2 rubber grommets although not essential

I am fiddling around with the Front Fender on My MotoX Bike and just cant get hold of them.

The bolts can be all thread or last half end threaded.

Anyone put me in the right direction

TA!

Toolshop or Engineering Supplies Firm in your local area

 

[Timolgra]

Re: Re: Nuts and Bolts?????????

Toolshop or Engineering Supplies Firm in your local area

Now, now Johnny just because you've had a sh*te day no need to be sarcastic

 

[JohnnyBoxer]

Re: Re: Re: Nuts and Bolts?????????

Now, now Johnny just because you've had a sh*te day no need to be sarcastic

Thought it was constructive (no pun intended)

 

[Banger]

Re: Re: Re: Nuts and Bolts?????????

Now, now Johnny just because you've had a sh*te day no need to be sarcastic

Sarcastic? Never saw it that way and i dont think Johnny did either .
Snobbery i just hate it!

 

[Bødkerman]

You want a Screw?

If you go into Central London at all there is a little shop on Theobalds Rd junction with Gray's Inn Rd (turn right going north from Chancery Lane tube) and they have screw in a Bun Dance!

Mike

 

[michael d]

www.namrick.co.uk , not sure if they will have the exact size you need but you can try

 

[Timolgra]

Re: Re: Re: Re: Nuts and Bolts?????????

Sarcastic? Never saw it that way and i dont think Johnny did either .
Snobbery i just hate it!

See these --> well that indicates joke

But to be fair 95mm length (or more) with 6mmx1mm is difficult to find but you could buy a length of 6mm stud, cut to length and fix with 2 two nuts or one dome head nut.

Tim

 

[Paul Narramore]

Yellow Pages under 'Bolt & Nut Stockists'. There are loads around.

 

[Banger]

Re: Re: Re: Re: Re: Nuts and Bolts?????????

See these --> well that indicates joke

But to be fair 95mm length (or more) with 6mmx1mm is difficult to find but you could buy a length of 6mm stud, cut to length and fix with 2 two nuts or one dome head nut.

Tim

- These do mean a joke your right but it was not quite like that was it.A joke with somebody like Johnny was the intention but at my expence.........I think you knew that really. Still perhaps you had an off day...No worries!

Still...... Thanks for the info anyway it was useful.

Infact thanks to you all i managed to find them today , mind you took me all day

 

[wildbeeste]

If you ever come to Hove, Namrick have a shop called the "nut and bolt store" in Portland Road.
It is just round the corner from where I live and they are very helpful even if you just want to buy one nut
Which reminds me of the lunatic who went into a laundrette raped the attendant washed his smalls and then ran away. The local rags headline was "Nut screws washes and bolts"

I am going to go and lie down now.

 

[JAY]

You could try Custom Fasteners ( 01686 629666 ) They do a wide range of sizes - certainly M6 x 100mm which you could trim down.

 

[Timolgra]

Re: Re: Re: Re: Re: Re: Nuts and Bolts?????????

- These do mean a joke your right but it was not quite like that was it.A joke with somebody like Johnny was the intention but at my expence.........I think you knew that really. Still perhaps you had an off day...No worries!

Actually I had already posted that I had had a "feckin brilliant day"

perhaps you a very very sensitive chappy and we should all make allowances for that. Hope you found your bolt BTW

 

[Banger]

Re: Re: Re: Re: Re: Re: Re: Nuts and Bolts?????????

Actually I had already posted that I had had a "feckin brilliant day"

perhaps you a very very sensitive chappy and we should all make allowances for that. Hope you found your bolt BTW

Well offcoarse you did!
No need to make allowances for me mate!
And that the fact you started this what you thought and only you thought was a funny remark and you keep coming back suggests that its you who is sensitive.

And to say we will all make Allowances for that
Who do you think you are 'We will all'

I notice you have a few posts under your belt , maybe, no not maybe, you do you think that you speak for us ALL on here.

I think your so called image or street cred has been attacked here like never before and you keep coming back to justify it.

I leave my Handbag on the deck oh great leader.

SHIT......... This really is starting to get funny

Talk to you later

If you want to PM me we will have a Chat over Tea !

 

[Timolgra]

Re: Re: Re: Re: Re: Re: Re: Re: Nuts and Bolts?????????

I think your so called image or street cred has been attacked here like never before and you keep coming back to justify it.

I leave my Handbag on the deck oh great leader.

SHIT......... This really is starting to get funny

Talk to you later

If you want to PM me we will have a Chat over Tea !

Need to see my therapist first, however I thought it funny from the outset.

 

[Banger]

Re: Re: Re: Re: Re: Re: Re: Re: Re: Nuts and Bolts?????????

Need to see my therapist first, however I thought it funny from the outset.

You will be Fine One Lump or Two!

 

[Timolgra]

Thanks.

Same time next month?

Tim