Paralever wheel in Monolever rear end....

[Steve R]

I fancy a Monolever G/S but prefer tubeless tyres. I've seen some pics of Monolever swinging arms and bevel boxes with Paralever wheels fitted, which have tubeless tyres. Does anyone know what modifications are required?

Steve.

 

[mikeyboy]

If I recall,you need to machine 16mm off of the wheel mounting boss (drum side)
You will also need a 4 bolt bevel
Don’t quote me on the exact measurement though as it’s a few years since I did one

 

[lewisjohn]

I started a thread some years ago detailing my build, “Project Bike Advice”
I fitted a paralever wheel to a standard RT bevel box without machining the hub. I’ve been using the bike for around two years with no problems.

 

[Tbolt]

I started a thread some years ago detailing my build, “Project Bike Advice”
I fitted a paralever wheel to a standard RT bevel box without machining the hub. I’ve been using the bike for around two years with no problems.

Link:
https://mail.ukgser.com/forums/showthread.php/269237-Project-bike-advice/page3