Hi all,
Been a bit of a C0ck today... I had a sticking piston in the front offside calliper, the side nearest spokes to be precise.
Any way.... I was cleaning the piston edges and had some wood in between the pistons to stop them popping out but the wood slipped and out came a piston

The next thing was having brake fluid dripping on my knee and the floor and estimate I lost 1 to 2 egg cups of fluid before I popped the piston back in place. I have just had the abs system bled and serviced on the 24k service and a competent friend had all the tools etc to do this. Bike is 2004 GSA ABS/SERVO
I realise now that the fluid has come from the abs resivior and I now have the brake warning light flashing. I now have to take the tank off and top up the pump. I know how to do this as I was present when the abs system was bled. Before I get my hands dirty tomorrow is there anything else I need to be aware of.
Muchly thanks in advance
Jon
Been a bit of a C0ck today... I had a sticking piston in the front offside calliper, the side nearest spokes to be precise.
Any way.... I was cleaning the piston edges and had some wood in between the pistons to stop them popping out but the wood slipped and out came a piston
The next thing was having brake fluid dripping on my knee and the floor and estimate I lost 1 to 2 egg cups of fluid before I popped the piston back in place. I have just had the abs system bled and serviced on the 24k service and a competent friend had all the tools etc to do this. Bike is 2004 GSA ABS/SERVO
I realise now that the fluid has come from the abs resivior and I now have the brake warning light flashing. I now have to take the tank off and top up the pump. I know how to do this as I was present when the abs system was bled. Before I get my hands dirty tomorrow is there anything else I need to be aware of.
Muchly thanks in advance
Jon




