Puig screen supports

[kwallace21]

Just fitted the Puig screen brackets to my 2018 GSA.
It seems to be a bit stiff to adjust now with the adjustment knob. Does anyone else find this?
Also, after replacing the original bmw bolts with the black Puig ones at both sides do you have to pop the nuts back on ? The replacement bolts seem to thread into the new brackets and seem rock solid. I haven't put the nuts back on. Too fiddley by half to get them on.

 

[hairysteve]

I too bought a set of puig screen supports for my 68 plate gsa 1200. Couldn't actually get them to fit as the threaded holes on bracket wouldn't quite line up with mounting holes on bike so put my single side wunderlich one back on which incidentally fits perfectly...

 

[Mr Bean]

Just fitted the Puig screen brackets to my 2018 GSA.
It seems to be a bit stiff to adjust now with the adjustment knob. Does anyone else find this?
Also, after replacing the original bmw bolts with the black Puig ones at both sides do you have to pop the nuts back on ? The replacement bolts seem to thread into the new brackets and seem rock solid. I haven't put the nuts back on. Too fiddley by half to get them on.

I've fitted a three of them and the first few adjustments the adjuster can be a bit firmer to use, I just spray a little white grease on the sliding bit and all is fine.

One of the fixing screws on each side has always been a bit tight - almost as it's been cross threaded. I've carried on as the tightening has been after a few full turns and assumed it's to stop them vibrating lose?