R12 G/S Exhausts

[Mad Paddy]

Pictures of non fitting bash plate with akrapovic headers
Think the non enduro bash plate might fit

 

[Mad Paddy]

More pictures of akrapovic headers

 

[TIJ650]

Curious, did any of you fit the fuelling module? If anything like its predecessors, it’ll probably need if binning CAT

Rapid Bike SMART 2 Fuelling Control Module

Rapid Bike SMART Fuelling Control Module Rapid Bike fuelling modules manage the R9T's injectors and lambda sensors in order to achieve a new fuelling map. This allows the bike to work around the stock ECU settings, which are very restrictive due to emission laws, and causes a dramatic...

piercitycustom.com

 

[Urban Rider]

I recently fitted the Ti Unit Garage headers with the standard can. Bike runs well and sounds great. Got the headers, Rapid Bike module, Hepco and Becker bash plate and a Wunderlich can protector for a bargain off eBay. The bike rode fine for about a week (without the module) with no errors on the clock then the emissions light came on. Module fitted and error gone..

 

[TIJ650]

I recently fitted the Ti Unit Garage headers with the standard can. Bike runs well and sounds great. Got the headers, Rapid Bike module, Hepco and Becker bash plate and a Wunderlich can protector for a bargain off eBay. The bike rode fine for about a week (without the module) with no errors on the clock then the emissions light came on. Module fitted and error gone.. View attachment 486604View attachment 486605View attachment 486605View attachment 486604View attachment 486605

I’m curious, did you buy the whole lot used? The headers look quite a mature blue is why I ask.

 

[Urban Rider]

I’m curious, did you buy the whole lot used? The headers look quite a mature blue is why I ask.

Yes all bought used, although that pic with the bash plate was taken around 2 weeks after fitting it. The lot was only on the sellers bike for around 200 miles..
Oh and at £900 for the lot I wasn’t complaining…

 

[mermoto]

I recently fitted the Ti Unit Garage headers with the standard can. Bike runs well and sounds great. Got the headers, Rapid Bike module, Hepco and Becker bash plate and a Wunderlich can protector for a bargain off eBay. The bike rode fine for about a week (without the module) with no errors on the clock then the emissions light came on. Module fitted and error gone

Urban Rider, that's really helpful. I have the Hepco Becker sump guard too and had read that someone else was unable to fit another set of headers with the BMW sump guard. I think it was the Akra. So you had no issues with the Unit headers? Also, which end can have you got fitted? OEM or one of the Unit silencers?

 

[Urban Rider]

Urban Rider, that's really helpful. I have the Hepco Becker sump guard too and had read that someone else was unable to fit another set of headers with the BMW sump guard. I think it was the Akra. So you had no issues with the Unit headers? Also, which end can have you got fitted? OEM or one of the Unit silencers?

Mermoto, I have the standard OEM can fitted and it’s loud enough under load.. No issues at all with the Unit headers and the Hepco and Becker bash plate..