Rad guards??

[Stepdoug]

Ok , looking for a set of radiator guards for a 68plate 1250 GS.
Been looking at different ones to suit the year but seem to be coming up with conflicting year related type to fit .? So question is which ones to fit this radiator as the ones I'm looking at seem to have an of centre bottom contact point ,.
Cheers

 

[GSian]

The BMW ones clip into those radiator cowls that you can see there, without using any screws. Others attach to the screw you see at the bottom and clip in at the top. You need to carefully take the existing cowl off (don't break the top clip, use a torch to see and squeeze the barbs together and pull lightly down) attach the guards and put the cowl back on. Don't think these are different on any of the 1250GS/As. The ones on my 2020 GS were the same as the ones on my 2023 GSA

 

[HGS]

A friend of mine has the BMW plastic ones and is very happy with them - Fitting as GSian says above
I have the Evotech metal ones and they are straightforward to fit, solid and have stood up well to 3 years of use on the 1250GS - These fit using the OE plastic cowl to secure. You only need to release the lower part of the cowl and slide the guard up into position
Your picture of the rad is the same as on mine
https://evotech-performance.com/col...ep-bmw-r-1250-gs-radiator-guards-2019-onwards

 

[Stepdoug]

A friend of mine has the BMW plastic ones and is very happy with them - Fitting as GSian says above
I have the Evotech metal ones and they are straightforward to fit, solid and have stood up well to 3 years of use on the 1250GS - These fit using the OE plastic cowl to secure. You only need to release the lower part of the cowl and slide the guard up into position
Your picture of the rad is the same as on mine
https://evotech-performance.com/col...ep-bmw-r-1250-gs-radiator-guards-2019-onwards

Thanks for the repelys. Now know which ones to look for