Ram Expert Required for Guzzi Fitment

[red1]

Used the BM fitting on the 1200GSA, Wunderlich dashboard on the 1200RT and now am stumped with the 1200 MG Breva.

It has the same type of cast bars as the RT so I tried the RAM mount in the Zumo kit that fits to the clutch reservoir mounting bolts but replacement bolts are a very coarse thread and won't work.

So any ideas on mounting?

 

[RAM-man]

Screws in the Zumo kit are metric and imperial
2 pcs ¼” – 20 2” long ST Steel
2 pcs 6mm x 55mm long ST Steel

Talk to the dealer find out thread pitch used

Or,
LHS fluid reservoir cover with RAM-B-346
LHS mirror stem with RAM-B-360
LHS cast yoke bracket, replace cap socket screw with RAM-B-367 (note M8 thread, sizes 55mm, 60mm, 65mm) think thread pitch is 1.25

Yoke centre do *not* use RAM-B-342 but contact Dr Bob (www.telferizer.com) and get adapted ball part, similar to a Blackbird (me thinks)