RDC with 2 set of wheels

Gussi

Registered user
Joined
Dec 10, 2003
Messages
51
Reaction score
0
Location
Norway
Hello!
Planning to buy a second set of wheels for my 12GSA LC -2014 and i want tyre pressure monitoring in both sets (RDC)
Anyone know if the bike can recognise 4 units and that the wheels can be swapped with no hassle?
 
I have a GS911 wifi and should be able to set up for two sets of wheels on my K1300S but have not been successful. I get round it by resetting the monitor codes with the GS911 every time that I swop wheels.
 
Spare Set Of Wire Wheels

I have a set of LC spoked wheels if you are looking for some.
Front is unused (Brand new) with a brand new Tourance next tyre.
Rear has been used with a slightly used Tourance next tyre circa 3500 miles by mid April.
No brake disks or ABS ring fitted to the front.
Wheels available mid April. 1600 quid for the pair.
 
Sounds good :)
r1happy: Did you have to go to a dealer to make them do anythng special to get the bike to recognice the second set?
 
I have a set of LC spoked wheels if you are looking for some.
Front is unused (Brand new) with a brand new Tourance next tyre.
Rear has been used with a slightly used Tourance next tyre circa 3500 miles by mid April.
No brake disks or ABS ring fitted to the front.
Wheels available mid April. 1600 quid for the pair.


Thanks for te offer!
I have someone very inside the bmw system trying to get hold of a pair of complete set. Want to be able to change fast :)
 
I have a GS911 wifi and should be able to set up for two sets of wheels on my K1300S but have not been successful. I get round it by resetting the monitor codes with the GS911 every time that I swop wheels.

I read about this on the hexcode site. Somthing about either register the number of the RDC unit in the GS911 program or aktivate the RDC by using spesific tool or letting the air out fast ...
 


Back
Top Bottom