Rear brake pedal height adjustment?

[Shep]

After a quick spin on the bike on monday it was very apparant that the rear brake pedal was set very high, is there any adjustment or have I fekked up and not put something back right?

I'm not with the bike at the moment to look, but i'd like to be able to take a look tomorrow.

Shep

 

[Kenny]

Shep, there is a 6mm bolt that presses down on the rear switch..adjust that accordingly and have the brake pedal set about 1" before it activates ( a little more if off road ).
Nice bike btw

 

[Shep]

Cheers Kenny

There's nothing like that there at the moment, i'll have to take a look in the box of bits and bobs left over

 

[how much]

Shep
when you have adjusted the pedal height for goodness sake adjust the actuating arm on the hub so that it points straight down with the bike at rest..

otherwise










you will never hear the bloody end of it from a certain "PROFF"



the voice of experience


how much

 

[Shep]

Shep
when you have adjusted the pedal height for goodness sake adjust the actuating arm on the hub so that it points straight down with the bike at rest..

otherwise










you will never hear the bloody end of it from a certain "PROFF"



the voice of experience


how much

Don't worry he wouldn't lower himself to look at a 'para'

 

[Shep]

The screw was totally missing

Ah well at least I can blame my age

Fitted the new oilcooler last night and it hits the new front guard so a new set of holes had to be drilled to move the guard 10mm forward, that means I have 4 x 5.5mm holes spare if anybody wants them, just cover the cost of postage

New battery arrived yesterday, a oddessy, it was leaking in its box, gave the suppliers a ring and they suggested I buy another Ridiculus!!! In the end after some discussions we agreed that another would be sent FOC and that's just arrived an hour ago, so apart from fitting the battery, bleeding the front brake and fixing the sidelight it's all done & ready for the MOT tomorrow hopefully

Shep

 

[Ogmios]

Shep,

kind of you to offer them there holes to the collective.
Thanks - but no, i've plenty.
in fact.....

 

[(RIP) pastyman]

Can you give us some idea of the hole sizes and are the metric. Could you look into ity please

 

[Bill-H]

Are you prepared to separate those holes ? I could do with half a one, how deep are they ?