Rear Shovel removed and replaced with this.....

ElliotGSA

Registered user
Joined
Mar 18, 2017
Messages
51
Reaction score
0
Location
Hants/Berks Border
I like the look of the bike without the rear shovel thing, I've only been on the bike in the wet once 😯😆 and the rear of the bike was covered in muck, reading on here a lot of you said it's the shovels fault, I've a PUIG hugger fitted and liked the look of this little pyramid plastics stick on from eBay at £11, we will see if it works if it ever gets to go out in the wet 😉
I really don't like the look of the aluminium plate behind the number plate so opted for this....
ad07cfb7db260e5781252e1bc95561d5.jpg
39e83ddfc2e56c64253fb57a9d1fc066.jpg


Sent from my SM-T560 using Tapatalk
 
Think I'd stick to not going out in the wet. ;)
Aluminium plate for the back and Mudsling to keep the water off that exposed (and expensive) rear shock is the way to go. That stick on extension isn't very wide in relation to the tyre.
 

Attachments

  • fullsizeoutput_5c67.jpg
    fullsizeoutput_5c67.jpg
    261.1 KB · Views: 362
I have a 3mm aluminium plate under the number late about 1/2" wider each side. The flip is 3" long full width with tapered sides.
I also have a mudsling.
 


Back
Top Bottom