REAR WHEEL PLAY

[BLUEDOG]

morning all,

have just replaced paralever and input/output drive bearings, used original shims but still have some play top to bottom. am i right in thinking it needs another shim to increase preload on taper bearing?

all on 96 1100 gs.

 

[Tsiklonaut]

morning all,

have just replaced paralever and input/output drive bearings, used original shims but still have some play top to bottom. am i right in thinking it needs another shim to increase preload on taper bearing?

all on 96 1100 gs.

Recheck the pivot bolt's thightness first (5 to 7 newtonmetres on one side (+105Nm contra nut) and 150Nm on other side). On most cases it's the 5Nm one creating the slack.

 

[BLUEDOG]

play is definetely in drive bearings, you can feel movement with finger between brake disc and drive housing, have double checked paralevers'