If you are of a challenged inside leg and suffer from excessive turbulence from the standard 07GS screen may I suggest the following quick and cheap fix.
Remove the two Torx style screws form the lower front of the screen.
Slacken off the two screen adjustment thumb wheels.
Insert a 5mm washer between both of the screens' "T" washers and their respective pivoting mounting, replacing the screw with a longer item.
Tighten the adjustment thumb wheels in the lowest position.
Job done.
Whilst the screen is slightly distorted from its original shape, this is not visible and my screen appears to be suffering no ill effects (ie cracking). The resulting change in screen angle prevents wind buffeting to the head.Slacken off the two screen adjustment thumb wheels.
Insert a 5mm washer between both of the screens' "T" washers and their respective pivoting mounting, replacing the screw with a longer item.
Tighten the adjustment thumb wheels in the lowest position.
Job done.
