Required. R1300 owner with a Vernier guage and five minutes

[MotoRevive]

Howdie.

I'm knocking up a new pin for a rear paddock stand on my lathe. And I wondered if the internal diameter of the spindle on the 1300 is the same. And if not, I'll make one for that too.

Any 1300 owners here willing to measure their's ? Ooooerrrr

 

[leadfarmer]

Hi

The battery is flat in mine but by the visual scale I measure 53mm inner diameter

Hope that helps

 

[MotoRevive]

It does Indeed. Thanks.

 

[Smartbazza]

Hi

The battery is flat in mine but by the visual scale I measure 53mm inner diameter

Hope that helps

For a minute I read ‘battery’ and thought not another!!

 

[pbbanks]

Howdie.

I'm knocking up a new pin for a rear paddock stand on my lathe. And I wondered if the internal diameter of the spindle on the 1300 is the same. And if not, I'll make one for that too.

Any 1300 owners here willing to measure their's ? Ooooerrrr

Don't you have a centre stand specced on your 1300.
Not sure why you need a paddock stand if you do.

 

[MotoRevive]

Don't you have a centre stand specced on your 1300.
Not sure why you need a paddock stand if you do.

I'm a mobile technician.

Some people remove their stands if off-roading or for weight saving. The Rallye spec 1200/1250 and eventual 1300 Rallye don't come with them as standard.

And there are some jobs that require the centre stand to be removed too .

 

[pbbanks]

I'm a mobile technician.

Some people remove their stands if off-roading or for weight saving. The Rallye spec 1200/1250 and eventual 1300 Rallye don't come with them as standard.

And there are some jobs that require the centre stand to be removed too .

Fair enough. I just measured my 1300 and confirm that it's 53mm ID.