RESULTS GS Carbon Fibre - Poll

[Adam1759]

Thanks again to everyone who took the time to register their interest in this, it's much appreciated.

The following items generated enough votes to warrant me getting them produced if votes were orders. I have some confirmed prices for you, the others are pending a prototype being produced

1. Air Tube - £87
2. Hand Guards - £99
3. Cylinder Head Guards with Kevlar inner skin - £89.50
4. Beak
5. Beak Tip
6. Dash (including screen mounts)
7. Starter Motor Cover
8. R/Hand Panel
9. Mudguard to fit 17" cast wheel conversion - £117 approx

These have an approx 6wk turn around from point of order - please bear in mind I'm not placing the biggest orders so I don't exactly get VIP treatment when it comes to speed.

Please either PM me or post up for whatever items you want. If you put your name down for pieces which are pending final costs and the price ends up being too high then you can just remove yourself - no problem at all. I do need names though to justify the cost of prototyping parts.

I'll monitor the orders for 2 weeks and then start taking payment (via Paypal to cover all parties)

One last thing, if anybody has a spare part of something which I need to prototype they are willing to donate(and subsequently not get back) I will arrange a discount of 80% if they buy a CF replacement. If it's prototyped and will be too expensive and/or I can't get 4-5 orders for that part then the donator will get their original part back.

 

[Adam1759]

Headcovers will be in this style

 

[Geno]

Thanks again to everyone who took the time to register their interest in this, it's much appreciated.

The following items generated enough votes to warrant me getting them produced if votes were orders. I have some confirmed prices for you, the others are pending a prototype being produced

1. Air Tube - £87
2. Hand Guards - £99
3. Cylinder Head Guards with Kevlar inner skin - £89.50
4. Beak
5. Beak Tip
6. Dash (including screen mounts)
7. Starter Motor Cover
8. R/Hand Panel
9. Mudguard to fit 17" cast wheel conversion - £117 approx

These have an approx 6wk turn around from point of order - please bear in mind I'm not placing the biggest orders so I don't exactly get VIP treatment when it comes to speed.

Please either PM me or post up for whatever items you want. If you put your name down for pieces which are pending final costs and the price ends up being too high then you can just remove yourself - no problem at all. I do need names though to justify the cost of prototyping parts.

I'll monitor the orders for 2 weeks and then start taking payment (via Paypal to cover all parties)

One last thing, if anybody has a spare part of something which I need to prototype they are willing to donate(and subsequently not get back) I will arrange a discount of 80% if they buy a CF replacement. If it's prototyped and will be too expensive and/or I can't get 4-5 orders for that part then the donator will get their original part back.

Would like to see the mudguard before in sign up that sort of money . still intrested in tip for 1100.

 

[Adam1759]

This, in CF. Boxer-design, £170 on their site.

Thanks gabriel_gs!

 

[Adam1759]

still intrested in tip for 1100.

No one else asked for this as I remember. If other people ask for it then it can be made, easily. Has to be a market though?

 

[Adam1759]

By way of an update; as a lot of the PM's have been asking about the Beak Tip and right hand Panel, I have sent those pieces from my bike to get an accurate cost for reproduction.

I hope to have pictures of the Head / Hand Guards and Air Tube through from my supplier very soon and will post up ASAP.

 

[Adam1759]

I now also have a Boxer-design 17" front mudguard coming very generously from gabriel_gs, I'll send it off for costing and get the confirmed price back for you all.

 

[Dainese Brave]

I'd be interested in the starter motor cover.

 

[Adam1759]

I'd be interested in the starter motor cover.

Hi mate, I'm trying to source one to use for costing/mould production.

 

[Dainese Brave]

Hi mate, I'm trying to source one to use for costing/mould production.

Keep me informed, I've been after one for ages

Ilmberger were/were going to make them..but then stopped production...don't know why?

 

[Adam1759]

Keep me informed, I've been after one for ages

Ilmberger were/were going to make them..but then stopped production...don't know why?

If the weather holds off I'll use mine. I think it'd look brilliant and I'd be the first one to buy it!

 

[thauma]

........

I hope to have pictures of the Head / Hand Guards and Air Tube through from my supplier very soon and will post up ASAP.......

 

[Adam1759]

Thanks again to everyone who took the time to register their interest in this, it's much appreciated.

The following items generated enough votes to warrant me getting them produced if votes were orders. I have some confirmed prices for you, the others are pending a prototype being produced

1. Air Tube - £87
2. Hand Guards - £99
3. Cylinder Head Guards with Kevlar inner skin - £89.50
4. Beak
5. Beak Tip £69.99
6. Dash (including screen mounts)
7. Starter Motor Cover
8. R/Hand Panel£51.99
9. Mudguard to fit 17" cast wheel conversion - £117 approx

I now have a decent PDF of all bike pieces (over 1000 for most bikes) I cant post it here due to the size (4.66MB) but if anybody knows how to do then let me know and I'll get it up. Also above are latests prices for a couple of 1150 parts, as requested. I have the prototype parts for these on order so I'll post pics of the 2 pieces with prices in red, as soon as I can.


If you'd like to see the PDF then either PM me with your email or email me directly at [email protected] and I'll get it over to you ASAP

 

[Adam1759]

Brand new item - PICTURES.

[/URL][/IMG]

[/URL][/IMG]

Two 1150 GSA Beak Tips which I picked up today from the supplier. Test fitted to my bike. As you can see the fit and finish is spot on. As above, £69.99 each.

 

[Adam1759]

Click for full size pics

 

[Deleted account 190920001]

I now have a decent PDF of all bike pieces (over 1000 for most bikes) I cant post it here due to the size (4.66MB) but if anybody knows how to do then let me know and I'll get it up. Also above are latests prices for a couple of 1150 parts, as requested. I have the prototype parts for these on order so I'll post pics of the 2 pieces with prices in red, as soon as I can.


If you'd like to see the PDF then either PM me with your email or email me directly at [email protected] and I'll get it over to you ASAP

Get a free google docs account or dropbox account and put it there then just post a link to it on here. Failing that drop me a PM and I will get it on the tinternet for you.

 

[Adam1759]

https://docs.google.com/leaf?id=0B4...GYtMWFhZTIxZTRjMjhi&hl=en_GB&authkey=CNKBirkB

Try that - a link to download the catalogue.

Cheers Marki

 

[flatdog]

Hi Marki.
clicked to download....not working??

 

[mercuryf1]

hey Mark,

do u have anything for '11 12GS hand guards?

thanks.

 

[Adam1759]

Hi

Somehow my name's been changed to Mark, it's Adam BTW! LOL

I have just had a gorgeous set of Handguards through for the 12, absolutely stunning. Are the 2010-11 handguards different to the last model?