Roadking special rear mudguard grommet

Flipfly

Well-known member
UKGSer Subscriber
Joined
May 26, 2006
Messages
15,021
Reaction score
244
Location
Stoke on Trent
Hi gents. Just fitted a charging lead to the RKS (turns out it was already fitted with an optimate one :blast

Anyway, I took the seat off and it was filthy under there because there is a bloody hole in the fender with no grommet in it, so shit is coming straight off the tyre into the underseat area.

I can’t find any reference to this hole being plugged with anything :nenau doesn’t show on the microfiche but wondered if anyone else with an RKS can pop their seat off and take a quick pic for me please.

Thanks in advance :thumb
 
Hi gents. Just fitted a charging lead to the RKS (turns out it was already fitted with an optimate one :blast

Anyway, I took the seat off and it was filthy under there because there is a bloody hole in the fender with no grommet in it, so shit is coming straight off the tyre into the underwear area.

I can’t find any reference to this hole being plugged with anything :nenau doesn’t show on the microfiche but wondered if anyone else with an RKS can pop their seat off and take a quick pic for me please.

Thanks in advance :thumb

:D:D Has someone hacked your life?
 
Lovin it matey, still trying to find a silk stars n stripes bandana and currently perfecting how to say Y’aaaaaaallll. I’ve got noisy pipes too (apparently they ‘save lives’).
 
It’s the hole for the single seat rear mounting point - it should have a rubber grommet in it...
 
Hi gents. Just fitted a charging lead to the RKS (turns out it was already fitted with an optimate one :blast

Anyway, I took the seat off and it was filthy under there because there is a bloody hole in the fender with no grommet in it, so shit is coming straight off the tyre into the underseat area.

I can’t find any reference to this hole being plugged with anything :nenau doesn’t show on the microfiche but wondered if anyone else with an RKS can pop their seat off and take a quick pic for me please.

Thanks in advance :thumb

I’ll have a look at mine tomorrow if it helps?

As you now know an optimate lead is hidden under the left hand side cover. :blast
 
Just had a look at the Jersey HD Microfiche... seems to just be a hole!!

My million year old Glide had a. Rubber grommet - must be cost cutting!!

Stick a square of Gorilla Tape over the hole - job done!
 
It’s the hole for the single seat rear mounting point - it should have a rubber grommet in it...

No it aint,just measure the hole and get 1 off e/bay or just put tape over it,cut it too size though other wise you will see it from the o/s of the bike.
 
If I can remember it's for the wiring going to the rear light/indicators.

Will take my seat off in the morning for a look see.
 
Just wondering if it was missing a genuine Harley grommet, but it looks like it’s not the case. A solution will be found, might need to buy a welder, a plasma cutter, two strips of gaffa tape, a flat plate of stainless, three sausages and a case of frogs.
 
Just push a frog into the hole... that will sort it.....



Rivet....
 
I’ve got two....




Sadly both employed keeping the water in...
 
Big hole here. :thumb2
 

Attachments

  • 1C1B1D60-600B-4713-AEDD-EB9E69051965.jpg
    1C1B1D60-600B-4713-AEDD-EB9E69051965.jpg
    238.5 KB · Views: 145
  • 9D8F9782-3093-40E7-ABCB-D24832C0D410.jpg
    9D8F9782-3093-40E7-ABCB-D24832C0D410.jpg
    233.7 KB · Views: 134
Cleaned up in 30 seconds. :thumb2
 

Attachments

  • 3EFA669F-81D8-4E0C-8358-E6527FF4EC94.jpg
    3EFA669F-81D8-4E0C-8358-E6527FF4EC94.jpg
    220.5 KB · Views: 149
Is that under the seat? Why didn’t they paint the hidden parts of the bike, rather than just leave it in primer? Shoddy work if you ask me...
 


Back
Top Bottom