Rt oil cooler trim section

[Bada bing]

Anyone know how to remove the OEM trim that sits in front of the oil cooler ?

Clearly see there are two plastic plugs on bottom but it appears there may be a torx at the top that can't be accessed as it's too close to oil cooler to fit a torx.

 

[GSTourer]

There is a screw at the top rear on either side of the plastic trim which has to be removed as well as the plastic trim clips. My Haynes manual says so!

 

[steadysteve]

I thought it fitted over the top of the existing trim after removing the side fairing panels? Never actually fitted it to mine so don't know for definite, sorry.

 

[Lonterra]

IIRC, you need to remove the main fairing panels to get access to a couple of hidden screws at the side of the oil cooler surround, in addition to the two visible trim clips.

 

[GSTourer]

IIRC, you need to remove the main fairing panels to get access to a couple of hidden screws at the side of the oil cooler surround, in addition to the two visible trim clips.

 

[Bada bing]

Thanks all