Scala G4....what buttons do I press to pair with a non cardo intercom

[Bounce]

I've forgotten which button/s I need to press on the Scala G4 unit in order to pair with a non cardo intercom unit (happens to be an interphone).

Can someone with this info please let me know....thx

 

[Norfolk Tiger]

Avoid this one

 

[Bounce]

Avoid this one

I will....

 

[Blackal]

I don't think the G4 pairs with non-scala units


The other might pair with the G4, in which case - press the centre button on top edge until you get the double-flash

Al

 

[Bounce]

I don't think the G4 pairs with non-scala units


The other might pair with the G4, in which case - press the centre button on top edge until you get the double-flash

Al

Thx....will give that try

 

[rossman999]

I think its only the Packtalk that will communicate with non Cardo units - thats what I was advised to purchase to communicate with two really old Q2's

PS its a fantastic piece of kit once you understand the instructions

 

[Bounce]

I think its only the Packtalk that will communicate with non Cardo units - thats what I was advised to purchase to communicate with two really old Q2's

PS its a fantastic piece of kit once you understand the instructions

I've managed to pair the G4 with an interphone F5MC before, but can't recall how I did it!!!

 

[The Big Dog]

To pair with a phone you need to press the top centre button fir about 6 seconds until it flashes red and blue then find it using Bluetooth and the pass code us 0000

 

[Bounce]

To pair with a phone you need to press the top centre button fir about 6 seconds until it flashes red and blue then find it using Bluetooth and the pass code us 0000

I've done this with ease , so no issue there....just need to know the pairing sequence with another non cardo intercom

 

[Bounce]

FWIW - managed to successfully pair the G4 with a new interphone tour by doing this:-

> Turned the interphone on & pressed the BT button to initiate pairing
> Turned the G4 on and press/held the volume up button until it flashes blue/red rapidly
> The 2 will then connect & the G4 light flashes blue slowly

Then, when you've turned the devices off to re-charge & then switch back on, they auto pair