scala unit dead

[UturnTony]

i've got a scala teamset setup.
my unit worked fine last time out which was a month or so ago, came to charge it weekend and it wont, charge that is the wifes charged ok. but mine sat there doing feck all. i can press and hold the button then let go while it's on the charger and the light comes on red for a few secs then goes out again returning to it's previously dead condition.

i reckon it's fcuked but someone might just know different, if so do tell

 

[Bobster]

MIne always works perfectly until i'm a thousand miles from home then packs in. Remove battery from the headset and clean the terminals. It worked for me but don't hold your breath. Good luck

 

[NLC]

I had two and gave up. Went for a Starcom. Technical support in the States is useless. "Can you please send to us and we will have a look" was the common answer.

 

[UturnTony]

MIne always works perfectly until i'm a thousand miles from home then packs in. Remove battery from the headset and clean the terminals. It worked for me but don't hold your breath. Good luck

cheers for that. will try the battery as you suggest.


"I had two and gave up. Went for a Starcom. Technical support in the States is useless. "Can you please send to us and we will have a look" was the common answer."


yep, i've had quite a bit of bother with the Scala units two replaced under warranty, one of which failed after a 200 mile ride in heavy rain. they are water resistant not water proof.
i'm going another route this time. i dont want anything with wires trailing around so will have to look around at other bluetooth stuff.

 

[sutty]

scala

hi tony,met you at the windmill the other week,anyway whot i always do is before i plug into the mains for charging make sure you put the wire in the battery first then plug into the mains socket then switch the socket on,i also noted that i had to really push the wire into the battery for it to charge.

 

[UturnTony]

hi tony,met you at the windmill the other week,anyway whot i always do is before i plug into the mains for charging make sure you put the wire in the battery first then plug into the mains socket then switch the socket on,i also noted that i had to really push the wire into the battery for it to charge.

hi sutty, have given that a go, still us
looking like a replacement setup is needed