Screen removal

[brianski]

Can someone please help with this. How do you go about removing the screen? Is it just a case of undoing the Torx screws and adjusters and then pulling the screen off or is there something else i should be doing. i ask becuase i had a go at this and it didn't budge. i didn't want to use too much force and break the damn thing.
Cheers.

 

[(RIP) sherpa]

removal

undo the four torxbolts (two each side) and remove them completely then just flex the screen and it will come away one side at a time - it can be quite stuck but is VERY flexible - you won't break it !!
Sherps

 

[rocks]

Easy..

Sherpa, means pull the screen out away from the bike.. there are two lugs at the front that you have to pull clear.. they are the hinge/pivot points.

The two front bolts are very long and the two back ones are shorter.

When you pop em back in, good idea to pop a bit of thread lock on em, and dont be too ham fisted tightening them up.

It is really easy.. i have done it a couple of times to fit the tobinator mounts and an ermax screen.. if i can do it.. it has to be easy..

 

[brianski]

Thanks guys I'll get to it this afternoon after watching Moto GP