Slipscreen any good?

[steadysteve]

Just wondered if anybody has used the Slipscreens tall screen on their gs lc?
My standard screen has a few cracks so I might replace it with a taller one but after using a taller screen on an 1150gs, which seemed to create more wind blast, I thought I would ask on here first.

Thanks

 

[mw3230]

I have used a Slipscreen screen on a previous bike and was happy with the product and the quality - especially at the price

 

[MondoRich]

I have used a Slipscreen screen on a previous bike and was happy with the product and the quality - especially at the price

Yes, bought one of these smoky grey after splashing petrol on my OE one.

Very pleased, larger than OE GS, similar to OE GSA so now I have more presence on the road and can ride visor up at 200mph

 

[BeemerBaz]

Had a SlipScreen on my K16, very pleased with it. It's now sat on a shelf in my garage.

 

[vRSG60]

Just fitted a tinted one to my LC. A 10 minute job it ain't.

The holes were slightly out and it was a pain to get the brackets back on without the grommets pushing out.
Also getting the screen back was difficult. Removing the winglet thingys helps to get the awkward bottom screws in.
Apart from that a great bit of kit.

 

[mattgslc]

Just fitted a tinted one to my LC. A 10 minute job it ain't.

The holes were slightly out and it was a pain to get the brackets back on without the grommets pushing out.
Also getting the screen back was difficult. Removing the winglet thingys helps to get the awkward bottom screws in.
Apart from that a great bit of kit.

you got a pic please on the bike ?
I'm also wanting a taller/bigger screen

 

[vRSG60]

you got a pic please on the bike ?
I'm also wanting a taller/bigger screen

Mine's the standard screen. More or less the same as the BMW screen.

 

[PhilBoy]

No need to take the winglets off. Just remove one screw, second one down, from each side, screen the comes off with the screen mounts. All screws then accessible. Hope that helps.