So what needs bracing on an 80G/S

[PW Cymru]

Maverick, myself and I believe Bambam are all in the bare frame rebuild process and looking into strengthing the frames of our respective 80G/S's.

Any good threads/articles on this subject.

Cheers

Paul

 

[Schtum]

While it doesn't relate directly to a G/S, this is the most comprehensive work I've seen on an airhead frame.....

http://www.teamincomplete.com/Boxer/boxerhome.html

http://www.teamincomplete.com/Boxer/frameqtvr.html

 

[BamBam]

Maverick, myself and I believe Bambam are all in the bare frame rebuild process and looking into strengthing the frames of our respective 80G/S's.

Any good threads/articles on this subject.

Cheers

Paul

So far looks like for liliths bike we will brace the head stock area and next to the gear box around the swing arm piviot points. and if we extend the mono swinging arm a brace for that as well, the question is will it be a Richie Moor extended swinging arm and shaft (@ 75mm) or the HPN(@100mm). or do I make a jig and do the SA myself and have a shaft made?

HPN


HPN


Richie Moor bike bellow




I hope to make the brakets myself and have dicided to Tig rather than Mig
so a good friend will tig for me as I can't....

 

[(RIP) Proff]

http://ukgser.com/forums/showpost.php?p=1736221&postcount=16
Lurchers is very nicely modded..

Plus ask Syco for pics of Camilles Headstock..

 

[PW Cymru]

I'm sure I read on here that somebody had a jig for a 100mm extended swinging arm.

Thanks for that gents I'll get some templates sorted and give Sycho a call.

Wonder what a jig would cost to make?

 

[Benjamin M]

Just been thinking this over for the last few weeks as I eventually want to replace the forks, and in turn extend the swinger and shaft.

Heres a thread on ADVrider that you may find useful

http://www.advrider.com/forums/showthread.php?t=470875

Also, see here http://www.wilddog.za.net/forum/index.php?topic=23723.0


Cheers, Benjamin

 

[bakerlonglegs]

Blah blah blah......

Hellooooooooo, what is this I see!? Hi Keith, welcome back you old scrote...

 

[BamBam]

Just been thinking this over for the last few weeks as I eventually want to replace the forks, and in turn extend the swinger and shaft.

Heres a thread on ADVrider that you may find useful

http://www.advrider.com/forums/showthread.php?t=470875

Also, see here http://www.wilddog.za.net/forum/index.php?topic=23723.0


Cheers, Benjamin

Thank you follow this link from Advrider
http://www.wanderbaustelle.eu/hpn_rahmen.html

 

[Benjamin M]

Thank you follow this link from Advrider
http://www.wanderbaustelle.eu/hpn_rahmen.html

Cheers chap. I was too lazy to go through the thread again..


Looks good though huh

 

[steve in nz]

I like pictures and this thread covers it to.

http://www.2-ventiler.de/board/thread.php?threadid=13165

hey why not make ya own frame like this fella did

http://www.advrider.com/forums/showthread.php?t=577039&highlight=paul+rooney

Paul appears to be currently testing the frame here. http://www.wherethefcukarewe.blogspot.com/?zx=1a16ee24716b3cc3

 

[(RIP) philgunn]

Richard Moore - Moorespeed

I got a 80gs swing arm with + 50mm in by Richard
if you want one doing get a price from him

pg

 

[(RIP) Geriatric Germ]

http://ukgser.com/forums/showpost.php?p=1736221&postcount=16
Lurchers is very nicely modded..

Plus ask Syco for pics of Camilles Headstock..

Bloody Hell Keith, thought I'd trod on yer Bean Bag
How is the Young Hippie??
We are hoping to pop down on the farm, see you then maybe.
Geriatric Gem says does piccy qualify as an Air Head ​

 

[Shurv]

100mm will make the bike f'ing tall when combined with the longer front forks. I'm 6ft and I can't touch the floor that well with 100mm rear swing arm added.I've had a 50mm extension in mine which will give me plenty of extra suspension movement without the daft seat height.