Sport Integral helmet

bumpy

Registered user
Joined
Sep 25, 2007
Messages
278
Reaction score
0
Location
Herts
Can someone tell me how to remove the visor on a sport integral helmet
 
Raise the visor to the "full open" position, then press down the tabs (one on each side) on the hinge mechanism. Takes 2 seconds per side...
 
Raise the visor to the "full open" position, then press down the tabs (one on each side) on the hinge mechanism. Takes 2 seconds per side...

Good man:clap:clap:clap:clap

Worked a treat

I bought a new helmet yesterday but didn't get any instructions. On the way home the visor seemed a bit blurred so I decided to give it a wash with clean water. WELL it looks like it have some sort of thick anti mist coating on the inside cause it started bubbling up right where I look through.

Now the visor is off I will get it cleaned up properly

Thanks again
 
Glad to be of help. Refitting the visor is a reverse of the removal procedure, but can be a little tricky until you get used to it, especially if you have large thumbs!

Be careful with the inner side of the visor - the anti-mist coating is very fragile and comes off quite easily, as I think you've already experienced.
 
Be careful with the inner side of the visor - the anti-mist coating is very fragile and comes off quite easily, as I think you've already experienced.

Yep, I'm taking it all aff now - got it soaking in a bowl of hot water :thumb2
 


Back
Top Bottom