Stainless steel kits for 1150GS

Status
Not open for further replies.
Arrived today, oh my god. How long is this going to take me to fit? :confused:

Cheers Steppers rather you than me counting these out. :bow
 
Steptoe, enough bits left for a R1150GS Adv ( withABS if it matters!)?
 
Please read fully before operating -


Right - this is what you need to know - and what i need to know.
You must include a contact number and UKGSER user name - if your not a sponser and i can't PM you, you don't get a kit -

The kits are for the 1150GS with ABS, not the ADV, but lots of people with ADV have bought them - the only difference are the under seat bolts, and the 2 longer screen bolts. And the difference between ABS and non-ABS isn't worth me messing about with.
You don't get the rear pannier frame bolts, as most people have different luggage fitted and they're all different lengths, but funnily enough the front bolts are the same on most luggage suppliers frames.

The kit doesn't include drain plugs.

This is what you do if you want to order a kit :-

Post a cheque for the amount £38 a kit, plus £6 standard parcel force, or £8 insured parcel force post ( the kits weigh 1.7KG), to -

Neil Harrison
5 Vale Crescent
London
SW15 3PJ .

include your (real) name and address, and what type of front brake calipers you have fitted to your bike, BMW or Brembo ( stamped on the caliper ) .

No need to ask if i have kits in stock. I do, and i'll post up when i'm near to running out.

Please re-read again and make sure you understand, as i'm getting lots of feck ups come through in the post.

Thank you . :thumb
 
Tony Davies - Please contact me, your address isn't coming up on parcel forces computer, so i'm unable to send the kit to you .

You haven't given me a contact number, or board user name, and you've sent me an incorrect amount for payment. :rolleyes:

Thank you
 
Every order received so far has been posted off today :D

Except -

Tony Davies = address no good for parcel force, no contact number or user name.

Gary Rowlands = can't contact, only work phone number, but has left the job, no user name supplied .

Paul Clark = no user name or contact number .

Dave Delaney = no user name or contact number.
 
bustupbiker said:
Steptoe, when will you be doing the 1200 kits please???

Good question, and i was hoping to do them in the not to distant future - but with all the fecking about with people sending the wrong amount, no information on which brake calipers, and incorrect addresses and no contact numbers, i don't know if i can be arsed.

How simple can you make it for people - it's true, never over estimate the intelligence of the general public


Thanks. Neil ( in a fecked off mood with better things to do)
 
For Fecks Sake

I'll supersize the costs, for those that have trouble reading -

£38 for the stainless kit

£8 insured parcelforce post = Total £46

£6 standard parcel force post = = Total £44

:rolleyes:
 
Neil,

Thanks very much, my bits arrived this morning aswell. A busy weekend in my garage fitting these if the weather stays as it is. Cheers :thumb
 
Anyone got a set for the 1100 yet!!
 
The missing info

Steptoe said:
Every order received so far has been posted off today :D

Except -

Tony Davies = address no good for parcel force, no contact number or user name.

Gary Rowlands = can't contact, only work phone number, but has left the job, no user name supplied .

Paul Clark = no user name or contact number .

Dave Delaney = no user name or contact number.

Hi have PM you with the info I know you like PMs :rolleyes:
 
Foreign orders

Hi

What about us foreigners - what are the postal costs for Denmark and can I transfer the money by "wire"

//kochman
 
kochman.dk said:
Hi

What about us foreigners - what are the postal costs for Denmark and can I transfer the money by "wire"

//kochman

Only UK post - to much arsing around to find out posting costs, banking costs exchange rates , and i haven't the time .

Don't moan at me, moan at the suppliers in your own country, who aren't giving you what you want :D
 
got mine thanks

I'll start once the snow goes :hammer but i think mrs engine house want a kit too :rolleyes:
 
Status
Not open for further replies.


Back
Top Bottom