Stolen Bike - Wiring Issue

[Kamikaze]

My 08 GSA was stolen this morning.
Fortunately, they rolled it down a hill near the house to a quiet spot and failed to hotwire it and I soon found it.

The only damage was caused by them pulling the wires out of the back of the ignition.

Now the problem. The connector block or blocks for the ignition and the ring antenna are missing. Are they integral to the wiring loom? Can they be bought seperately and just replaced or will I have to get them from an old loom?

All assistance from the collective knowledge appreciated.

 

[(RIP) Bin Ridin]

Could the connector blocks be still in situ, if they pulled the wires out?

 

[Kamikaze]

Unfortunately not.
Grumpy One, of this parish, unscrewed the cover to find them missing.
We assumed they would be there.
I've looked where the bike was found and no luck.

 

[socket086]

i was talking to grumpy one earlier he said you are looking for loom there's one on eabay buy it now for 69.99 if that is any good i have dealt with them before with no problems.

 

[Padge]

Check out the electrical section on this fiche:

http://www.maxbmwmotorcycles.com/fiche/DiagramsMain.aspx?vid=51558&rnd=03192010
They list all the plugs with part numbers (If you can identify which is the missing one by the look of it)...
Either way, it's possible to get spare plugs...

PS.. 35 days to fix it

 

[Michaelk]

i was talking to grumpy one earlier he said you are looking for loom there's one on eabay buy it now for 69.99 if that is any good i have dealt with them before with no problems.

Wiring loom for an RT from BMW was about €800 - €1000 last time I quoted for one!

That looks like a great deal... if only to cut off the connectors!

 

[Kamikaze]

Does anybody have any idea which of the plugs in the diagram above are the ones needed.
Looking online but still unclear.

 

[Kamikaze]

Thanks for the help, lads.
The connectors we think are correct are on order so should be on the road next week. (well in time, Padge, for the 26th )
That'll be a good feeling.