Stubby exhaust 1150GS - apologies in advance...

[gothbiker]

I've just fitted it, it misses the panniers and I have a piece of pipe to deflect it just incase


From a fuckin iphone....

 

[buellzebub]

I've just fitted it, it misses the panniers and I have a piece of pipe to deflect it just incase

Sorted

 

[Demongroover]

My left pannier has some heat reflective padding on the underside but I've not noticed any excess heat from the exhaust. Seems to work fine.


Sent from my iPhone using Tapatalk

 

[Tallmarkb59]

Stubby exhaust and custom rear end

That is the one - thanks everyone.

Thanks for posting about the stubby can. Just ordered one for my 1150 GS using the e bay link £8.99.

Has anyone removed the tool box / rack combo and replaced with an after market endure style plastic mud guard ?

 

[GS Addict]

Got an old cat? Cut off the stubs, polish, and sell one to a friend

 

[ahebron]

Got an old cat? Cut off the stubs, polish, and sell one to a friend

Will the RSPCA let you do that?
Got a local Bengal that would look nice

Adrian

 

[Sergeant Pluck]

You can get a 48mm OD 1.5mm wall thickness stainless u-bend on eBay very cheaply, and cut it to any shape you like. Gives a perfect 45mm ID

 

[Riceburner]

Got an old cat? Cut off the stubs, polish, and sell one to a friend

I did the same with a Remus Titanium Y-piece!

Made for lovely exhaust tips.

Unfortunately I've lost both of the bloody things!

 

[othios]

Mine with pannier fitted. You've got to keep the exit well away from the pannier.

[/QUOTE]

Please do you have a link for this stubby? thank you.

 

[othios]

Please do you have a link for this stubby? thank you.

 

[Bryn]

Please do you have a link for this stubby? thank you.

Sorry but I stopped making these a few years back..... your best bet is eBay

 

[Paul Young]

Remus used to do a nice exhaust tip for the GSXR that looked neat.

 

[Riceburner]

Got an old cat? Cut off the stubs, polish, and sell one to a friend

I did the same with a Remus Titanium Y-piece!

Made for lovely exhaust tips.

Unfortunately I've lost both of the bloody things!

More recently - I found a 2nd hand catalyser on ebay for about £20 (I got lucky) and did it again.
The diameter of the 'inlet' pipes are an exact match for the 'outlet' of the catalyser box.

If you fit the larger pannier, don't forget to fit 'blocks' on the pannier because the lower mount is in a different position on the full-size pannier.
(no photos, but will to get one next time I have the opportunity)

 

[Paul Young]

I made up a kit for when I fit a full size l/h pannier, that drops the Remus down below it. Link pipe and sliding bracket were both cheap as chips from eBay.

More recently - I found a 2nd hand catalyser on ebay for about £20 (I got lucky) and did it again.
The diameter of the 'inlet' pipes are an exact match for the 'outlet' of the catalyser box.

If you fit the larger pannier, don't forget to fit 'blocks' on the pannier because the lower mount is in a different position on the full-size pannier.
(no photos, but will to get one next time I have the opportunity)

 

[Robbi]

This is what I've fitted


Sent from my iPad using Tapatalk

Where would I find one of these? What name would I look under.?

 

[Paul Young]

Looks like an eBay special to me…

 

[West coast gser]

Where would I find one of these? What name would I look under.?

Moto GP can

 

[Robbi]

Moto GP can

Thank you

 

[Robbi]

Anyone tried one of these Moto GP cans.? Any thoughts or opinions.?

 

[Paul Young]

I’ve had similar, but they’re not very nice.

I tried one when I went to the IOM and set off 3 car alarms as I rode past at 5am. The rest of the hotel passed comment when I got back for breakfast and I swapped back before I went out again… It’s buried in the garage somewhere, not seen for around 4-5yrs. For what they cost, it’s got to be good for a laugh though

https://www.ebay.co.uk/itm/184549191633?hash=item2af7fd2fd1:g:XLgAAOSwiItfu51R

Anyone tried one of these Moto GP cans.? Any thoughts or opinions.?